School of
Information Technology and Electrical Engineering

The Australasian Transformer Innovation Centre is working closely with industry to develop the technologies that will significantly reduce transformer life cycle costs.

Our current primary research areas are:

  • Decreasing the risk of transformer failure during normal and contingency events
  • Reducing maintenance costs and extending life with improved condition monitoring
  • Investigating improved operation, performance and risks with natural ester oils
  • Increasing transformer utilisation and working transformers smarter
  • Examining effects of renewable generation on transformer life and cyclic rating

Research projects are organised into primary, secondary and tertiary tiers. The level of access for industry is based on their membership type (Platinum or Gold), and based on their commercial arrangement, detailed below.

  • The Primary research program addresses broad industry needs and is funded from membership contributions. Both platinum and gold membership have access to the IP generated by these projects for their internal use. Sub-licensing or commercialization rights are subject to written agreement with The University of Queensland. Gold membership provides a royalty-free license to use IP for the duration of membership, whereas platinum provides a perpetual license.
  • A Secondary project is funded by cash contributions from members together with a successful research grant. Conditions are negotiated on a case-by-case basis. Typically, the IP generated will only be available to the participating organisations.
  • Tertiary projects are fully funded by parties, to meet their specific objectives. Conditions are negotiated on a case-by-case basis. The project will be confidential and the IP generated will only be available to the participating organisations.


Optimizing network ratings for power transformers retrofilled with vegetable oil (part of the primary research program)

When parts of the network become overloaded the utility has a certain time to switch load to other substations, evening out this high load which helps prevent disruption to the consumer and the premature ageing of assets. The time to respond is obviously related to how quickly a transformer becomes too hot. Vegetable oil dielectrics are known to have lesser cooling abilities than mineral oils, however paper insulation ages slower in vegetable oil. Consequently, in this laboratory-based investigation the test power transformer is used to investigate the thermal limits a utility applies to their asset fleet, to determine whether changes are required to their existing policies on how quickly they must switch load.

Project timeline is September 2017 until December 2018.

Development of PD Analytic Tools for Ester Fluid Filled Transformers

This project aims to investigate how to reliably and accurately measure, process and interpret PD signals from an ester fluid transformer. PD measurements will be recorded from experimental PD sources (comprising an ester fluid and pressboard insulation system) and also from ester fluid transformers including the TIC research transformer. By comprehensively analysing the measurement results, the characteristics of different types of PD activities arising from ester fluid filled transformers will be better understood. The appropriateness of current methods for using PD measurements to measure and calibrating insulation deterioration in mineral oil filled transformers will be assessed for ester oil filled transformers.

Project timeframe is July until December 2018.

Criteria for Retro filling Transformers with Ester Fluids

This project will deliver an outcome for TIC members to use when considering retrofilling transformers with ester fluids. It will allow TIC members to assess the transformer on the basis of its original design and construction parameters. It will make recommendations on how to record data, perform design reviews and develop prospective thermal models that allow for predicting inservice performance of the retrofilled unit.

Asset Management of Network Power Transformers in the Presence of High Penetrations of Solar and Wind Generation

Australia’s power generation is rapidly shifting from synchronous generators to inverter-connected PV and wind-powered generators. Generators do not pay for the shared transmission network which must be funded by end-use customers who already face unacceptably high network charges. There is therefore pressure on network companies to minimize additional shared network costs to accommodate new generators. As new shared network power transformers cost up to tens of millions of dollars, it is highly desirable to increase the utilisation of existing network transformers rather than replace them with higher capacity transformers when connecting solar PV and wind farms to the network.
The challenge is how to evaluate the changes in lifecycle costing of shared network power transformers when a new solar PV or wind farm connects to the network. This must compare the options of purchasing a new, higher rated, power transformer, with the option of increasing the utilisation and loading of an existing transformer and thereby defer capital expenditure.

Project timeframe is 2018.



If you would like to find out more about our research, please contact us.