[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
AW: AW: AW: [microblaze-uclinux] Xmdstub connect on serial port
Hi John,
I just got the kernel down in the flash and the bootloader.c with your bitfile works.
Two things:
1) On the web you still have a link to the mbvanilla.c under bootloader but in the mbvanilla_ddr project there is a bootloader.c that seems to be more recent. It looks like the mbvanilla.c does not work. It hangs. Bootloader.c works fine.
2) From comparing my reports to yours you have used
Release 5.2.02i - xst F-30a
And my version is
Release 5.2.03i - xst F.31
Other than that I cannot see much difference at a first quick look but I will look at the files in more detail on my way home (train ride of 55 minutes, plenty of time :-))
(I really have to get a running linux system to make my own kernel using your toolchain.)
I let you know when I find other major differences.
Jan
> -----Ursprüngliche Nachricht-----
> Von: John Williams [mailto:jwilliams@itee.uq.edu.au]
> Gesendet: Donnerstag, 24. Juli 2003 13:41
> An: microblaze-uclinux@itee.uq.edu.au
> Betreff: Re: AW: AW: [microblaze-uclinux] Xmdstub connect on
> serial port
>
>
> Schunke Jan-Hendrik wrote:
>
> > Converint to mcs and writing to prom worked for your
> bistream. I have
> > tried it with my bitstream but that did not work.
>
> > Can you send me your reports (srp, par, mrp, pad, bld) and
> I can check
> > if I find any differences there?
>
> They are attached. Let me know if you need anything more. I
> must also
> confirm that I'm building the same as the mbvanilla_ddr on
> the web site.
> I have an internal CVS for my hardware - the zip files on the web
> don't track every tiny update, but don't think I've made any changes
> since the last update.
>
> John
>
>
>
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/