[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [microblaze-uclinux] JFFS2 and MTD

To: microblaze-uclinux@itee.uq.edu.au
Subject: Re: [microblaze-uclinux] JFFS2 and MTD
From: Robert Swindells <rjs@fdy2.demon.co.uk>
Date: Mon, 11 Aug 2003 14:24:45 +0100 (BST)
In-reply-to: <3F37473B.80306@itee.uq.edu.au> (message from John Williams onMon, 11 Aug 2003 17:35:23 +1000)
Reply-to: microblaze-uclinux@itee.uq.edu.au
Sender: owner-microblaze-uclinux@itee.uq.edu.au


John Williams wrote:
>The port progresses at a great rate - no longer fiddling in the bowels 
>of the kernel thankfully!   Anyway, does anybody have experience with 
>jffs2 mounts on top of the MTD drivers?

I have used jffs2 with StrataFlash on ARM. I have also used MTD with
older BootBlock flash with variable block sizes.

>I've created a MTD map for the flash devices on the Insight board, and 
>can happily do direct access to and from the flash via /dev/mtdXX and 
>/dev/mtdblockXX.

What does your map look like ?

Robert Swindells
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/

Follow-Ups:
- Re: [microblaze-uclinux] JFFS2 and MTD
  - From: John Williams <jwilliams@itee.uq.edu.au>

References:
- [microblaze-uclinux] JFFS2 and MTD
  - From: John Williams <jwilliams@itee.uq.edu.au>

Prev by Date: Re: [microblaze-uclinux] [Fwd: Evaluation Board]
Next by Date: [microblaze-uclinux] Toochain build successful
Previous by thread: [microblaze-uclinux] JFFS2 and MTD
Next by thread: Re: [microblaze-uclinux] JFFS2 and MTD
Index(es):
- Date
- Thread