[microblaze-uclinux] Minimal mb-system on virtexII

[Kemna Jan-Willem <jan-willem.kemna@thomson.net>]

Hi there.

On my current pcb i use a virtex-II device, currently the xc2v80-4fg256c.
The only external component is an AMD-flash memory, currently the am29lv641.
The communication with the outside world is now only serially via i2c and
spi, 
but it should not be too difficult to get a uart connected to it as well.

I'm wondering if this pcb can be used to start testing with microblaze and
uclinux ???
Is the xc2v80 big enough for that or do i have to replace it with a bigger, 
pincompatible device (if so, which one, xc2v250 or xc2v1000)??

What else am i overlooking/forgetting ???

Greetings,
JWK.

-----------------------------------------------------
Jan-Willem Kemna
THOMSON Broadcast Solutions Nederland B.V.
Phone:	+31 (0)76 5721 566
Fax:	      +31 (0)76 5721 548
Email:	jan-willem.kemna@thomson.net
website:    www.ThomsonGrassvalley.com
-----------------------------------------------------
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/