Re: [microblaze-uclinux] image.bin, download.bit

[Rahul Sarvadevabhatla <rahul@dilloneng.com>]

Hello John,

Thanks for the reply.

I cannot get or put files locally. Should the tftpd path be in the 
inetd.conf and passwd in the /etc directory. In my case it is not.

Rahul.

>>>>>>>>>>>>>>>>>> Original Message <<<<<<<<<<<<<<<<<<

On 10/14/2003, 4:49:19 PM, John Williams <jwilliams@itee.uq.edu.au> wrote 
regarding Re: [microblaze-uclinux] image.bin, download.bit:


> Hi Rahul,

> Rahul Sarvadevabhatla wrote:
> > Hello Greg, John,
> >
> > When I try to run ftp. I am able to connect to another machine. When I
> > run trace command and try to get a file, I get the following error "eth0:
> > device error 8, resetting device". Then I keep getting this message
> > continously on the console.

> I'm sure I've seen this before somewhere, but cannot remember where.
> This error message is generated within the xemac driver
> (drivers/net/xilinx_emac/adapter.c).

> >
> > Also, when I run tftp and transfer a file it is timing out. When I run
> > tcpdump on its ip, it gives a message saying it was not able to connect
> > to the UDP port of the machine it was trying to transfer the file to.

> check your tftp server config - can you get/put files locally on the 
server?

> Also into which directory on microblaze are you pulling the file?  It
> needs to be writeable (/usr/.. or /var).

> Regards,

> John

> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@itee.uq.edu.au
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive : 
http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/


___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/