[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[microblaze-uclinux] uCLinux on Virtex2Pro

To: <microblaze-uclinux@itee.uq.edu.au>
Subject: [microblaze-uclinux] uCLinux on Virtex2Pro
From: "Roberto Farina" <roberto.farina@cefriel.it>
Date: Fri, 5 Dec 2003 08:43:14 +0100
Reply-to: microblaze-uclinux@itee.uq.edu.au
Sender: owner-microblaze-uclinux@itee.uq.edu.au
Thread-index: AcO7A3C5Dzi6EUhTSyeFnnuU3rjycQ==
Thread-topic: uCLinux on Virtex2Pro

Hi everyone,
my team is going to make uCLinux running on an Insight/Memec 2VP7 rev3 board (equipped with a Virtex2Pro device).

Kernel was compiled without problems; we rebuilt the hardware platform basing on the mbvanilla arch found on the itee site, but replacing the ddr memory with the sdram one.

Till now, everything seems to work: the kernel is booting and it reaches the login prompt.

We still got some communication problem, since we've only one serial port: we use the JTAG as second interface. Another problem is related to bidirectional communications on the rs232 interface, but we hope to solve it shortly.

Best regards.
----------------------------------
Roberto Farina
ESD Researcher - CEFRIEL
Milan, Italy
----------------------------------

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/

Follow-Ups:
- Re: [microblaze-uclinux] uCLinux on Virtex2Pro
  - From: thill

Prev by Date: [microblaze-uclinux] Holger Nissle/DEMAN/LMSCentral/Leica is out of the office.
Next by Date: Re: [microblaze-uclinux][patch] error building the kernel
Previous by thread: [microblaze-uclinux] Holger Nissle/DEMAN/LMSCentral/Leica is out of the office.
Next by thread: Re: [microblaze-uclinux] uCLinux on Virtex2Pro
Index(es):
- Date
- Thread