[microblaze-uclinux] Little problem with ML300

[Roberto Farina <roberto.farina@xxxxxxxxxx>]

Hi all,
	I'm trying to port the uClinux on a Xilinx ML300 board.
I got a problem during the boot that I wasn't able to solve 'till now.

In attachment there's the small log I can provide to make you understand when 
the boot stops. No problems in programming the device and downloading the 
image. The same project works fine on the other board I'm working with (Memec 
XC2VP7)

I've no idea on how to solve it: I've failed in every attempt.
Any suggestion?

Thanks in advance

--------------------------------------------------------
Roberto Farina
CEFRIEL - Embedded Systems Design Unit
Via Fucini, 2 - 20133 MILANO (ITALY)
Phone:    +39 02 23954 236
Fax:      +39 02 23954 254
E-mail:   roberto.farina@cefriel.it
-------------------------------------------------------- 
Xilinx Microprocessor Debug (XMD) Engine
Xilinx EDK 6.1.1 Build EDK_G.13
Copyright (c) 1995-2002 Xilinx, Inc.  All rights reserved.
XMD% mbconnect stub -comm serial -port com1 -baud 57600
Connecting to XMD stub..
XMD communication stub initialized. Version No: 2
Communicating with XMD stub on target board
UART opened successfully
Connected to MicroBlaze "stub" target. id = 0
Starting GDB server for "stub" target (id = 0) at TCP port no 1234
XMD% con 0x80000000
USERSTOP at
   A0000:   BA0C0118  brki    r16, 280
XMD%