[microblaze-uclinux] rrd report

[Roberto Farina <roberto.farina@xxxxxxxxxx>]

I attach what the "rrd" command in XMD reports.
Next step is to try with mb-objdump...
I'll keep you update.

Regards

--------------------------------------------------------
Roberto Farina
CEFRIEL - Embedded Systems Design Unit
Via Fucini, 2 - 20133 MILANO (ITALY)
Phone:    +39 02 23954 236
Fax:      +39 02 23954 254
E-mail:   roberto.farina@cefriel.it
-------------------------------------------------------- 
Xilinx Microprocessor Debug (XMD) Engine
Xilinx EDK 6.1.1 Build EDK_G.13
Copyright (c) 1995-2002 Xilinx, Inc.  All rights reserved.
XMD% mbconnect -comm serial -port com1 -baud 57600
Targets: [sim|stub|mdm|ppc_hw]
Unable to connect to MicroBlaze Target
XMD% mbconnect stub -comm serial -port com1 -baud 57600
Connecting to XMD stub..
XMD communication stub initialized. Version No: 2
Communicating with XMD stub on target board
UART opened successfully
Connected to MicroBlaze "stub" target. id = 0
Starting GDB server for "stub" target (id = 0) at TCP port no 1234
XMD% con 0x80000000
USERSTOP at
   A0000:   BA0C0118  brki    r16, 280
XMD% rrd
    r0: 00000000      r8: 8009bf84     r16: 000a0000     r24: ffffffff
    r1: 8009bebc      r9: 0000000a     r17: 00000000     r25: 00000000
    r2: 800944cc     r10: fffffffb     r18: ffff052b     r26: 00000000
    r3: 00000000     r11: 00000000     r19: 00000001     r27: 00000000
    r4: 0000052a     r12: 000000a0     r20: 00000000     r28: 00000000
    r5: 000000a7     r13: 8009c020     r21: 00000000     r29: 00000000
    r6: 0000ffff     r14: 00000000     r22: 000000a7     r30: 00000000
    r7: 0000001b     r15: 8000dee4     r23: 000000fc     r31: 00000000
    pc: 000a0000     msr: 000000a8
XMD%