[microblaze-uclinux] mbvanilla_ddr_6_1, ml300, etc

[antti@xxxxxxxxxxxx]

Tnx John,

I tried to "morpht" the mbvanilla for EDK 6.1 to work with ML300
but... the mbvanilla for 6.1 fails to synthesise with EDK 6.1 - so I
had no option as to get working system and trying to get that similar
to mbvanilla.

I will check the interrupt routing, and test again, uups the file
online is old, I already
tested with MHS where the irq routing table was
OK (as much as I could see) it still didnt work.

I it woud be a real real big help to have small C program that tests
the mbvanilla system and lets say write POST codes to some GPIO port
and if UARTs ok to UART also. so if compiling it to image for
0x80000000 it would test if the hardware is ready for linux

antti

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/