[microblaze-uclinux] Hi Everyone

[Ivan <salorankatu@xxxxxxxx>]

Hello, my name is Ivan

I am new in this mailing list. I am working with a RC1000PP board of
Celoxica, based on a XCV2000E FPGA. I've already implemented MicroBlaze
in my platform to execute different applications, but now i am
interested in use uLinux.

Following the messages in this mailing list, currently i am implementing
a bootloader (based on the mbvanilla_net bootloader.c file) in order to
load and execute a program in the SRAM of the platform (4*2 MB banks of
SRAM) throw serial port. The platform doesn't have serial port, but I am
using two general I/O pines connected to an external circuit with a
RS232 IC. I load the program in srec format (convert .elf to .srec with
mb-objcopy) into the SRAM, and until now all works fine. Tomorrow i will
try to execute my first program using the bootloader. I have seen that
it's necessary to compile the program with a custom linker script... i
have the linker script example post in a previous message and i will try
to use it.

I hope to collaborate with my experience.

Best regards,
		Ivan

P.D.: Sorry for my English :D

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/