Re: [microblaze-uclinux] [patch] SMsC 91C113 support for SUZAKU

[Matthew Rubenstein <email@xxxxxxxxxxxx>]

There are netlists available for ethernet codecs, which would require
only an RJ14 connector on 6-8 pins. Have you tried porting the ethernet
driver to an API stub that calls that kind of core?


On Fri, 2004-04-16 at 03:01, John Williams wrote:
> Hi Yashi,
> 
> Yasushi SHOJI wrote:
> > Hi all,
> > 
> > SUZAKU will be shiped with smsc 91C113, which is pin/register
> > compatible with 91C111, but has only 16bit bus.
> > 
> > and here is the patch for driver/net/smc91111.c.
> 
> I'm happy with the asm-microblaze side of this, but the smc driver patch 
> should probably go to uclinux-dev for review and so on.
> 
> Cheers,
> 
> John
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@itee.uq.edu.au
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
-- 


(C) Matthew Rubenstein

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/