[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [microblaze-uclinux] XMD connect question
jwilliams@itee.uq.edu.au
Sent by: To: microblaze-uclinux@itee.uq.edu.au
owner-microblaze-uclinux@ite cc:
e.uq.edu.au Subject: Re: [microblaze-uclinux] XMD connect question
05/17/2004 04:52 AM
Please respond to
microblaze-uclinux
Hi John,
>Try quitting XMD after the downloa completes, then restart it and
reconnect.
>This seems to help xmd and xmdstub to resynch.
I tried that also. It still gives me the same response. There is
something I
should mention. I'm not using 2 serial ports. I only have the one and
it's
for the console. For debugging I use the JTAG uart. I don't know if this
makes a lot of difference. I didn't give you a complete error message on
my
last post.
JTAG Uart ReadByte timeout
XMD: continue: Error in single step
Thanks again for all the reponse.
Loi
***CONFIDENTIALITY NOTICE***
This communication (and any attachment) is confidential. It should only be
read by the person(s) to whom
it is addressed. If you have received this communication in error, please
notify the sender by reply and delete this communication.
*****************************************
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/