[microblaze-uclinux] Make error

["Kevin Somervill" <kevin.m.somervill@xxxxxxxx>]

Hello folks,
This is my first time building uClinux and I'm note sure what I've done.
Downloaded the source (several times now), updated, make menuconfig,
make dep and I get the following error.

/opt/uClinux/uClinux-dist [ksomervi]$ make dep
make ARCH=microblaze CROSS_COMPILE=mb- -C linux-2.4.x dep
make[1]: Entering directory `/opt/uClinux/uClinux-2.4.x'
.
.
.
make[5]: Leaving directory `/opt/uClinux/uClinux-2.4.x/drivers/acpi'
make -C at91 fastdep
make: Entering an unknown directory
make: *** at91: No such file or directory.  Stop.
make: Leaving an unknown directory
make[4]: *** [_sfdep_at91] Error 2
make[4]: Leaving directory `/opt/uClinux/uClinux-2.4.x/drivers'
make[3]: *** [fastdep] Error 2
make[3]: Leaving directory `/opt/uClinux/uClinux-2.4.x/drivers'
make[2]: *** [_sfdep_drivers] Error 2
make[2]: Leaving directory `/opt/uClinux/uClinux-2.4.x'
make[1]: *** [dep-files] Error 2
make[1]: Leaving directory `/opt/uClinux/uClinux-2.4.x'
make: *** [dep] Error 2

Per the instructions, I have Insight as the vendor,  2V1K_Microblaze is
the target, and accept all defaults.  During make menuconfig I accept
the remaining defaults (both of them).

Any suggestions?

Thanks,
ks

------------------------------------------------------
Kevin Somervill     Email: kevin.m.somervill@nasa.gov
 Computer Engineer     Electronic Systems Branch, SEC
                       5 N. Dryden Street M/S 488
 Phone: 757.864.6570   NASA Langley Research Center
 Fax:   757.864.7944   Hampton, VA 23681-2199
------------------------------------------------------
 You must be the change you want to see in the world.

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/