RE: [microblaze-uclinux] Make error

["Kevin Somervill" <kevin.m.somervill@xxxxxxxx>]

Hello,
So the CVS checkout wouldn't build so I tried the uClinux-dist-20040408
tarfile and it built.  Not sure why the CVS didn't work, I will have to
continue to look into that.  I installed the kernel in the flash of the
V2MB1000 substituting my image.bin file for John's demo producing the
following.

Linux version 2.4.24-uc0 (ksomervi@summervillap-pctemp) (gcc version
2.95.3-4 Xi
linx EDK 6.2 Build EDK_Gm.11) #4 Tue Jun 15 15:38:07 EDT 2004
.
.
.
Execution Finished, Exiting

Sash command shell (version 1.1.1)
/>

Woo hoo.  It's beer thiry so I'm done for the day.  If I find anything
on the CVS build issue, I'll post it here, or with uClinux (just thought
I'd start here with the questions).

ks


|-----Original Message-----
|From: owner-microblaze-uclinux@itee.uq.edu.au 
|[mailto:owner-microblaze-uclinux@itee.uq.edu.au] On Behalf Of 
|Kevin Somervill
|Sent: Monday, June 14, 2004 1:52 PM
|To: microblaze-uclinux@itee.uq.edu.au
|Subject: [microblaze-uclinux] Make error
|
|
|Hello folks,
|This is my first time building uClinux and I'm note sure what 
|I've done. Downloaded the source (several times now), updated, 
|make menuconfig, make dep and I get the following error.
|
|/opt/uClinux/uClinux-dist [ksomervi]$ make dep
|make ARCH=microblaze CROSS_COMPILE=mb- -C linux-2.4.x dep
|make[1]: Entering directory `/opt/uClinux/uClinux-2.4.x'
|.
|.
|.
|make[5]: Leaving directory `/opt/uClinux/uClinux-2.4.x/drivers/acpi'
|make -C at91 fastdep
|make: Entering an unknown directory
|make: *** at91: No such file or directory.  Stop.
|make: Leaving an unknown directory
|make[4]: *** [_sfdep_at91] Error 2
|make[4]: Leaving directory `/opt/uClinux/uClinux-2.4.x/drivers'
|make[3]: *** [fastdep] Error 2
|make[3]: Leaving directory `/opt/uClinux/uClinux-2.4.x/drivers'
|make[2]: *** [_sfdep_drivers] Error 2
|make[2]: Leaving directory `/opt/uClinux/uClinux-2.4.x'
|make[1]: *** [dep-files] Error 2
|make[1]: Leaving directory `/opt/uClinux/uClinux-2.4.x'
|make: *** [dep] Error 2
|
|Per the instructions, I have Insight as the vendor,  
|2V1K_Microblaze is the target, and accept all defaults.  
|During make menuconfig I accept the remaining defaults (both of them).
|
|Any suggestions?
|
|Thanks,
|ks
|

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/