Re: [microblaze-uclinux] Xilinx Multimedia Board

[John Williams <jwilliams@xxxxxxxxxxxxxx>]

Hi Didier,

didier delacretaz wrote:

> I'm trying to port the mbvanilla on a Xilinx Multimedia board that comes 
> with a Virtex-II 2v2000 FPGA
> In the documentation, I red that I have to map the mbvanilla_net target 
> to my board and when it's working I can modify the kernel.

That's correct.

> I can't undersand why the kernel had to be modified and what kind of 
> modifications I must do.

If the physical resources on your board (RAM, ethernet PHY, etc) are 
similiar to the V2MB1000 board that mbvanilla_net supports, then kernel 
changes will be minimal.

The first step is get the mbvanilla_net target going on your board - use 
the usual debugging methods (XMD etc) to ensure that the memory, uart 
etc are all working.  Don't modify the address map (in system.mhs).

If you tell us a bit more about the board you are using, we can probably 
provide some more detail suggestions.

Regards,

John
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/