[microblaze-uclinux] Re: [uClinux-dev] ping echo takes 10ms

[John Williams <jwilliams@xxxxxxxxxxxxxx>]

Hi Anand,
anand_12 wrote:

>  I have uclinux running on my memec spartan 2e microblaze based system with fully functional ethernet.
> 
>  I assigned a loopback interface IP address and a LAN ip address for the microblaze board..I am able to ping the board from any computer on the network...
>  
>  we are running microblaze at 66Mhz...

Sounds like you are making good progress now

>  one thing what i have noticed is the time(round trip time..i guess) as reported by the ping request is 10 ms for both- computers on the network and also the loopback interface...how can they be the same?

A few days ago I sent a patch to the mb-uclinux mailing list (and later 
applied to CVS) that "fixes" this.  It uses the on-board timer 
peripheral to generate much finer timing resolution.    Either update 
your kernel sources from cvs, or just grab that patch from the mailing 
list archive and apply it direectly.

Regards,

John
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/