Re: [microblaze-uclinux] clock scaling

[John McGrath <john.mcgrath@xxxxxxxxxx>]

Hi,
Virtex 4 DCM support the new Dynamic Reconfiguration (DRP) interface. 
This allows the changing to the configuration without the need to use ICAP.
It's all in the V4 User guide :)
Hope this helps!
John

antti@openchip.org wrote:

>Hi
>
>the avnet links is about how to change freq of an
>EXTERNAL PLL (CDC5801), not DCM
>
>changing DCM params is possible with all families that have ICAP
>primitive, there are some appnotes that would helpful, but not
>anything that would drop in and use.
>
>Antti
>
>___________________________
>microblaze-uclinux mailing list
>microblaze-uclinux@itee.uq.edu.au
>Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
>Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
>
>  
>
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/