[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [microblaze-uclinux] opb2Wb Wrapper
Did you get the example to work, or the opb2wb wrapper? As far as I can
tell, the opb2wb is still missing the obp2wblib file, and there seems to be
a misspelled signal name (rst).
If someone was able to synthesis this, I sure would like to know how.
rich
-----Original Message-----
From: owner-microblaze-uclinux@itee.uq.edu.au
[mailto:owner-microblaze-uclinux@itee.uq.edu.au] On Behalf Of Egidio
Caricati
Sent: Wednesday, December 15, 2004 8:20 AM
To: microblaze-uclinux@itee.uq.edu.au
Subject: R: [microblaze-uclinux] opb2Wb Wrapper
I have tried your example and it's work fine....:-)) Thanks, Egidio
-----Messaggio originale-----
Da: owner-microblaze-uclinux@itee.uq.edu.au
[mailto:owner-microblaze-uclinux@itee.uq.edu.au]Per conto di Kevin Somervill
Inviato: mercoledi 15 dicembre 2004 15.41
A: microblaze-uclinux@itee.uq.edu.au
Oggetto: RE: [microblaze-uclinux] opb2Wb Wrapper
Hello Edigio,
I've had to do this type of thing to make use of a GCLK input as a general
I/O in EDK (otherwise you have to leave EDK and stuff in a bufg). For
examples, you can look in the
$EDK_INSTALL_DIR\hw\XilinxProcessorIPLib\pcores\util_bus_split_v1_00_a
for a Xilinx provided example and I am attaching a simple blinker example
that doesn't even connect to any of the microblaze stuff. Both of these show
how to instantiate general logic in EDK that may or may not be related to
the microblaze system. For the blinker, put it into your global user cores
directory or your project pcores and you can then add it in the add edit
cores dialog.
Any other discussion about how to do this should be moved to a Xilinx forum
as it has wandered off topic for this list.
/ks
|-----Original Message-----
|From: owner-microblaze-uclinux@itee.uq.edu.au
|[mailto:owner-microblaze-uclinux@itee.uq.edu.au] On Behalf Of Egidio
|Caricati
|Sent: Wednesday, December 15, 2004 6:43 AM
|To: microblaze-uclinux@itee.uq.edu.au
|Subject: R: [microblaze-uclinux] opb2Wb Wrapper
|
|
|I'm sorry but I can't understand,
|there is someone who cam provide un examples?
|thanks in advance
|Egidio
|
|-----Messaggio originale-----
|Da: owner-microblaze-uclinux@itee.uq.edu.au
|[mailto:owner-microblaze-uclinux@itee.uq.edu.au]Per conto di Kevin
|Somervill
|Inviato: lunedi 13 dicembre 2004 14.18
|A: microblaze-uclinux@itee.uq.edu.au
|Oggetto: Re: [microblaze-uclinux] opb2Wb Wrapper
|
|
|Hello Rich and John,
|
|>> I should have been more clearer. I'm using ISE to implement other
|>> parts of my design. Besides that, I'm not sure how to add wishbone
|>> peripherals using only EDK once I've added the opb2wb component w/o
|>> using IDE.
|
|You can look in one of John's older mbvanilla releases for the
|"my_inverter" which shows how to instantiate generic logic.
|So long as you describe the block correctly with the mpd/pao files as
|John mentioned, you can instantiated any generic logic. Even if it's
|not related to an embedded processor.
|
|> platgen is fully data driven, it should be possible to describe the
|> wishbone bus with a typical mpd/pao file, then have it create
|> connectivity for wishbone cores etc. I haven't actually
|tried it, but
|> i'm pretty sure custom buses can be supported like this.
|
|I've put lot's of stuff into designs that had nothing to do with the
|microblaze and this is a convenient way to go. The constructs used in
|making EDK compatible
| components also serve to encourage fairly generic, parameterizable
|blocks. And it's a lot better than jumping back and forth between xps
|and ise.
|
|/ks
|
|___________________________
|microblaze-uclinux mailing list
|microblaze-uclinux@itee.uq.edu.au Project Home Page :
http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive :
http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
___________________________
microblaze-uclinux mailing list microblaze-uclinux@itee.uq.edu.au Project
Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive :
http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive :
http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/