Re: [microblaze-uclinux] lrz problem

[sky tam <waimingsky1@xxxxxxxxx>]

Hi, John, I have tried the teraterm terminal, it is better, at least
in every trnasfer there is a chance to reach 100%. However, it is very
strange that the transfer process would repeat and repeat again by
itself, never get finish. is this a problem from the terminal or from
the Uart driver bugs?

THX
sky


On Sun, 23 Jan 2005 11:43:34 +1000, John Williams
<jwilliams@itee.uq.edu.au> wrote:
> Hi Sky,
> 
> sky tam wrote:
> > I am using lrz Zmodem command to send some files to my microblaze
> > system from herperterminal , however, there is come random error such
> > as the system hand in the middle, the transfer stopped right before
> > the transfer going to be finished or cant get started when I am too
> > late to send file from the hyperterminal. Do you guy see this problem
> > before?? thx
> 
> I never had much luck with the lrzsz suite - particularly when sending
> files to the microblaze.
> 
> Can you succesfully send files in the other direction - ie from the
> microblaze to your PC?  I suspect you might be hitting the old bug in
> the uartlite drivers  - that occasionally causes lockups if you dump a
> large amount of data over the terminal connection.
> 
> Also, it might be worth trying a decent terminal program - hyperterminal
> is just horrible.  For PCs, teraterm is a good alternative.
> 
> Regards,
> 
> John
> 
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@itee.uq.edu.au
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
> 
>
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/