[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [microblaze-uclinux] EDK



Awesome, thanks. I will try it again. Last time I did it, it failed right at the beginning of the install script. I didn't have much time to debug it when that happened. I will re-try. So, which download cable are you using if the parallel doesn't work?

-Tim

-----Original Message-----
From: owner-microblaze-uclinux@itee.uq.edu.au [mailto:owner-microblaze-uclinux@itee.uq.edu.au] On Behalf Of Schunke Jan-Hendrik
Sent: Tuesday, January 25, 2005 3:05 AM
To: microblaze-uclinux@itee.uq.edu.au
Subject: AW: [microblaze-uclinux] EDK

Hi Tim,

As John mentioned it runs under Kernel 2.6 without the parallel port driver :-(
Where did you fail?

We installed ise to /opt/xilinx/ise6_3 and edk to /opt/xilinx/edk6_3
Here are env variables that have to be set (by sourceing the two scripts)

/opt/xilinx/ise6_3/settings.sh:

#! /bin/sh
XILINX=/opt/xilinx/ise6_3
export XILINX
NPX_PLUGIN_PATH=${XILINX}/java/lin/jre/plugin/sparc/ns4
export NPX_PLUGIN_PATH
if [ -n $LD_LIBRARY_PATH ]
then
LD_LIBRARY_PATH=${XILINX}/bin/lin:${LD_LIBRARY_PATH}
export LD_LIBRARY_PATH
else
LD_LIBRARY_PATH=${XILINX}/bin/lin
export LD_LIBRARY_PATH
fi
PATH=${XILINX}/bin/lin:$PATH
export PATH
LMC_HOME=${XILINX}/smartmodel/lin/installed_lin
export LMC_HOME
LD_ASSUME_KERNEL=2.4.7
export LD_ASSUME_KERNEL
DISPLAY=:0
export DISPLAY

/opt/xilinx/edk6_3/setup.sh:

export XILINX_EDK=/opt/xilinx/edk6_3
export LD_LIBRARY_PATH=$XILINX_EDK/bin/lin:$LD_LIBRARY_PATH
export PATH=$XILINX_EDK/bin/lin:$XILINX_EDK/gnu/microblaze/lin/bin:$XILINX_EDK/gnu/powerpc-eabi/lin/bin:$PATH

Hope this helps

Jan

> -----Ursprüngliche Nachricht-----
> Von: owner-microblaze-uclinux@itee.uq.edu.au 
> [mailto:owner-microblaze-uclinux@itee.uq.edu.au] Im Auftrag 
> von Tim Rosario
> Gesendet: Montag, 24. Januar 2005 17:58
> An: microblaze-uclinux@itee.uq.edu.au
> Betreff: RE: [microblaze-uclinux] EDK
> 
> 
> Hi Jan, are you running on kernel 2.6 or 2.4? I tried on FC3 
> and it failed...
> 
> --Tim
> 
> -----Original Message-----
> From: owner-microblaze-uclinux@itee.uq.edu.au 
> [mailto:owner-microblaze-uclinux@itee.uq.edu.au] On Behalf Of 
> Schunke Jan-Hendrik
> Sent: Monday, January 24, 2005 4:18 AM
> To: microblaze-uclinux@itee.uq.edu.au
> Subject: AW: [microblaze-uclinux] EDK
> 
> Oh, one more thing I forgot:
> 
> In 
> 
> /etc/X11/gdm/gdm.conf 
> we had to set 
> 
> DisallowTCP=false
> 
> Jan
> 
> -----Ursprüngliche Nachricht-----
> Von: owner-microblaze-uclinux@itee.uq.edu.au 
> [mailto:owner-microblaze-uclinux@itee.uq.edu.au] Im Auftrag 
> von Peter Ĺberg
> Gesendet: Montag, 24. Januar 2005 10:08
> An: microblaze-uclinux@itee.uq.edu.au
> Betreff: [microblaze-uclinux] EDK
> 
> 
> Hi,
> Sorry forthis off-topic question but is anyone running the 
> EDK and ISE software under Linux? I read that x 6.3 should be 
> possible to run in Linux. Mvh / Best Regards,
> 
> Peter Ĺberg
> Infotiv AB, www.infotiv.se
> Västra Hamngatan 8
> SE-411 17 Göteborg
> 
> Dir. +46 31 339 39 31
> Fax +46 31 339 39 01
> Mobile +46 709 81 49 16
> peter.aberg@infotiv.se
> 
> -- 
> This message has been scanned for viruses and 
> dangerous content by Mailscanner and is 
> believed to be clean. 
> 
> -- 
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
> 
> 
> ___________________________
> microblaze-uclinux mailing list 
> microblaze-uclinux@itee.uq.edu.au Project Home Page : 
http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/


___________________________
microblaze-uclinux mailing list microblaze-uclinux@itee.uq.edu.au Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/



-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/


___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/