[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
AW: [microblaze-uclinux] EDK
Hi Tim,
To be honest: EDK on a second Windows PC which uses the linux generated data :-(
I hope someone out there will get the xilinx parallel IV running under linux 2.6 shortly ;-)
Jan
> -----Ursprüngliche Nachricht-----
> Von: owner-microblaze-uclinux@itee.uq.edu.au
> [mailto:owner-microblaze-uclinux@itee.uq.edu.au] Im Auftrag
> von Tim Rosario
> Gesendet: Dienstag, 25. Januar 2005 15:10
> An: microblaze-uclinux@itee.uq.edu.au
> Betreff: RE: [microblaze-uclinux] EDK
>
>
> Awesome, thanks. I will try it again. Last time I did it, it
> failed right at the beginning of the install script. I didn't
> have much time to debug it when that happened. I will re-try.
> So, which download cable are you using if the parallel doesn't work?
>
> -Tim
>
> -----Original Message-----
> From: owner-microblaze-uclinux@itee.uq.edu.au
> [mailto:owner-microblaze-uclinux@itee.uq.edu.au] On Behalf Of
> Schunke Jan-Hendrik
> Sent: Tuesday, January 25, 2005 3:05 AM
> To: microblaze-uclinux@itee.uq.edu.au
> Subject: AW: [microblaze-uclinux] EDK
>
> Hi Tim,
>
> As John mentioned it runs under Kernel 2.6 without the
> parallel port driver :-( Where did you fail?
>
> We installed ise to /opt/xilinx/ise6_3 and edk to
> /opt/xilinx/edk6_3 Here are env variables that have to be set
> (by sourceing the two scripts)
>
> /opt/xilinx/ise6_3/settings.sh:
>
> #! /bin/sh
> XILINX=/opt/xilinx/ise6_3
> export XILINX NPX_PLUGIN_PATH=${XILINX}/java/lin/jre/plugin/sparc/ns4
> export NPX_PLUGIN_PATH
> if [ -n $LD_LIBRARY_PATH ]
> then
> LD_LIBRARY_PATH=${XILINX}/bin/lin:${LD_LIBRARY_PATH}
> export LD_LIBRARY_PATH
> else
> LD_LIBRARY_PATH=${XILINX}/bin/lin
> export LD_LIBRARY_PATH
> fi
> PATH=${XILINX}/bin/lin:$PATH
> export PATH
> LMC_HOME=${XILINX}/smartmodel/lin/installed_lin
> export LMC_HOME
> LD_ASSUME_KERNEL=2.4.7
> export LD_ASSUME_KERNEL
> DISPLAY=:0
> export DISPLAY
>
> /opt/xilinx/edk6_3/setup.sh:
>
> export XILINX_EDK=/opt/xilinx/edk6_3
> export LD_LIBRARY_PATH=$XILINX_EDK/bin/lin:$LD_LIBRARY_PATH
> export
> PATH=$XILINX_EDK/bin/lin:$XILINX_EDK/gnu/microblaze/lin/bin:$X
ILINX_EDK/gnu/powerpc-eabi/lin/bin:$PATH
>
> Hope this helps
>
> Jan
>
> > -----Ursprüngliche Nachricht-----
> > Von: owner-microblaze-uclinux@itee.uq.edu.au
> > [mailto:owner-microblaze-uclinux@itee.uq.edu.au] Im Auftrag
> > von Tim Rosario
> > Gesendet: Montag, 24. Januar 2005 17:58
> > An: microblaze-uclinux@itee.uq.edu.au
> > Betreff: RE: [microblaze-uclinux] EDK
> >
> >
> > Hi Jan, are you running on kernel 2.6 or 2.4? I tried on FC3
> > and it failed...
> >
> > --Tim
> >
> > -----Original Message-----
> > From: owner-microblaze-uclinux@itee.uq.edu.au
> > [mailto:owner-microblaze-uclinux@itee.uq.edu.au] On Behalf Of
> > Schunke Jan-Hendrik
> > Sent: Monday, January 24, 2005 4:18 AM
> > To: microblaze-uclinux@itee.uq.edu.au
> > Subject: AW: [microblaze-uclinux] EDK
> >
> > Oh, one more thing I forgot:
> >
> > In
> >
> > /etc/X11/gdm/gdm.conf
> > we had to set
> >
> > DisallowTCP=false
> >
> > Jan
> >
> > -----Ursprüngliche Nachricht-----
> > Von: owner-microblaze-uclinux@itee.uq.edu.au
> > [mailto:owner-microblaze-uclinux@itee.uq.edu.au] Im Auftrag
> > von Peter Ĺberg
> > Gesendet: Montag, 24. Januar 2005 10:08
> > An: microblaze-uclinux@itee.uq.edu.au
> > Betreff: [microblaze-uclinux] EDK
> >
> >
> > Hi,
> > Sorry forthis off-topic question but is anyone running the
> > EDK and ISE software under Linux? I read that x 6.3 should be
> > possible to run in Linux. Mvh / Best Regards,
> >
> > Peter Ĺberg
> > Infotiv AB, www.infotiv.se
> > Västra Hamngatan 8
> > SE-411 17 Göteborg
> >
> > Dir. +46 31 339 39 31
> > Fax +46 31 339 39 01
> > Mobile +46 709 81 49 16
> > peter.aberg@infotiv.se
> >
> > --
> > This message has been scanned for viruses and
> > dangerous content by Mailscanner and is
> > believed to be clean.
> >
> > --
> > This message has been scanned for viruses and
> > dangerous content by MailScanner, and is
> > believed to be clean.
> >
> >
> > ___________________________
> > microblaze-uclinux mailing list
> > microblaze-uclinux@itee.uq.edu.au Project Home Page :
> http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive :
> http://www.itee.uq.edu.au/> ~listarch/microblaze-uclinux/
>
>
>
> ___________________________
>
> microblaze-uclinux mailing list
> microblaze-uclinux@itee.uq.edu.au Project Home Page :
http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
___________________________
microblaze-uclinux mailing list microblaze-uclinux@itee.uq.edu.au Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
___________________________
microblaze-uclinux mailing list microblaze-uclinux@itee.uq.edu.au Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/