RE: [microblaze-uclinux] Questions on auto-config build flow

["Taeweon Suh" <suhtw@xxxxxxxxxxxxxx>]

Hi,

You have to select "use interrupt" when building your platform in
peripheral selections. Default is not using interrupt.
I think that's why you don't have interrupt controller in your platform.

Taeweon


> Here you go.
>
> David Banas
> Field Applications Engineer
> Nu Horizons Electronics Corp.
> 2070 Ringwood Avenue
> San Jose, CA 95131
> (408)434-0800 - office
> (415)846-5837 - cell
> http://www.nuhorizons.com
> -----Original Message-----
> From: owner-microblaze-uclinux@itee.uq.edu.au
> [mailto:owner-microblaze-uclinux@itee.uq.edu.au] On Behalf Of John
> Williams
> Sent: Wednesday, January 26, 2005 5:51 PM
> To: microblaze-uclinux@itee.uq.edu.au
> Subject: Re: [microblaze-uclinux] Questions on auto-config build flow
>
> David Banas wrote:
>> Sathya,
>>
>> I don't seem to have any 'intc' peripheral defined in my 'system.mhs'
> file.
>> Is it mandatory?
>
> You will need one interrupt controller instance in your hardware to run
> uClinux.  Normally there will be at least two or three interrupt sources
> - the timer, uartlite and ethernet controller.  The interrupt controller
> is require to get them into the microblaze.
>
> Can you send your MHS and MSS files?
>
> Cheers,
>
> John
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@itee.uq.edu.au
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive :
> http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
>
>
> ________________________________________________________________________
> This email has been scanned for all viruses by the MessageLabs Email
> Security System. For more information on a proactive email security
> service working around the clock, around the globe, visit
> http://www.messagelabs.com
> ________________________________________________________________________
>


----------------------------------------------
Taeweon Suh

Ph.D. Candidate
School of Electrical and Computer Engineering
Georgia Institute of Technology
Atlanta, Georgia USA

Lab: CoC345
Tel: +1-404-385-6273
E-mail: suhtw@ece.gatech.edu
----------------------------------------------

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/