[microblaze-uclinux] Port to a new card

[Valentin Longchamp <valentin.longchamp@xxxxxxx>]

Hello,

I am interested in knowing a few things about porting microblaze-uclinux 
to a new XC2V1000 board.

The first thing is the feasability of the thing :  provided that the 
card actually only has 2x512 Kbytes of external SRAM (plus the internal 
720 Kbits from the embedded BRAM) am I going to be able to run a minimal 
uclinux kernel ? By minimal I mean for example without networking 
support since I don't have an Ethernet port on the card, but I would 
need kernel module support for example. And how big is an average 
uclinux kernel image ?

The second question is about the configuration of the design : I don't 
have a Flash Memory module on my system (it is planned but not available 
yet), and no Ethernet connection either, so I will have to reconfigure 
the whole thing using "traditionnal" serial connections ? How long will 
it take according with the basic kernel configuration of the first 
question ?

Thank you

Valentin

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/