[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[microblaze-uclinux] RE: CORE_CLOCK_FREQ

>Under auto-config, the kernel gets the system clock frequency
> from the MSS file, specifically the parameter C_CORE_CLOCK_FREQ
> which lives in the PROCESSOR section of the MSS file.


John,
  Thanks.

  To change the speed, I created 50MHz and 66MHz projects with the BSB wizard.  Then, I compared the MHS, MSS and UCF files to find the 
differences.  The MSS files did not have any differences - they do not
even have that parameter listed.  Odd.
   
  They also have PARAMETER XMDSTUB_PERIPHERAL = debug_module, but
David's project does not.  Is it important?  I can still download
using XMD.

  As a data point for Edmond Coté, my download of a 2MB image.bin
File took 5.3 seconds with a Xilinx "Parallel Cable IV".

Best Regards,
  Michael Lee



___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/