Re: [microblaze-uclinux] Booting uClinux

[Tyrone Kwok <tokwok@xxxxxxxxx>]

Ryan,

You can download my EDK 6.2 project at:
http://www.eee.hku.hk/~tokwok/MB-3s400c.zip

Please kindly note that:
1. My system runs at 40MHz.
2. In the ZIP file, I have included a kernel image (image.bin) for your testing.
3. The flash is only used for downloading the kernel image to RAM, and hence
    I haven't enabled the flash in uClinux yet.

Hope this helps!

Cheers,
Tyrone


On 4/20/05, Ryan Ahern <supernaut@escaperisk.com> wrote:
> Tyrone,
> 
>     What did you use to test the flash to ensure proper reading/writing? 
> 
>     Would you also mind posting your MHS file? I'd really like to take a
> look and see where my Flash settings are off.
> 
>     Thanks,
>           Ryan
> 
> Tyrone Kwok wrote: 
> Hi,

I am also using the NuHorizons S400 board and using EDK6.2. I
> would
like to ask if
you have enabled the RAM filesystem support in:

Memory
> Technology Devices (MTD) | Mapping drivers for chip access |
Generic uClinux
> RAM/ROM filesystem support

BTW, with reference to David's S1500 design
> files, I am able to use
the flash on that board to download the kernel
> image. (Thanks David
;-)

Cheers,
Tyrone

 
> 
> ___________________________ microblaze-uclinux mailing list
> microblaze-uclinux@itee.uq.edu.au Project Home Page :
> http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux Mailing
> List Archive :
> http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/