[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [microblaze-uclinux] login issue when booting


John,
Here are my files.  and yes from what I understand the auto-config passes the necessary values for that stuff.  at least it has for me since I orginally had the wrong memory size in my edk project and when I fixed that it fixed it self in the making of the kernel. I will look at your files here sometime today and get back to you on those.  But hopefully the files atached might help you out.  Also I was usign EDK 6.3 but just updated to 7.1 early this week.



Brett

John McGrath <john.mcgrath@xilinx.com>
Sent by: owner-microblaze-uclinux@itee.uq.edu.au

04/22/2005 10:56 AM

Please respond to
microblaze-uclinux@itee.uq.edu.au
To
microblaze-uclinux@itee.uq.edu.au
cc
Subject
Re: [microblaze-uclinux] login issue when booting





Hi Brett,
Thanks for the offer to help!
My MHS and MSS are pretty simple (attached) and I also attached the auto-config.in.
The version of the kernel was downloaded completly new wednesday of this week. the only previous kernel I tried was late feb/start of march, and I had the same problem as I'm having now...


I have a pretty simple system - no caches enabled, etc. I assume that somehow auto-confing.in knows what parameters to pass to gcc to enable/disable certain processor features?
One thing about the mdm - the version of it I am using is the version that John Williams had in his ml401 reference platform, i.e. 2.01.a

Maybe If I could get a look at your MHS/MSS I could try put your settings into my baord? (I guess it's just a ucf change needed, all else should be ok!) What version of the EDK are you using?

Cheers,
John





mcnernbm@notes.udayton.edu wrote:

John ,y board also has led sand stuff but I took the dirver out for now to have a minimul kernel so that once Igot that working I could go back and addstuff back in slowly.  This way I had lss to debug and less things that could cause an issue.   Can you post .mss and .mhs file?   Hipefully we can figure otu why yours wont boot all the way cause I feel your pain cause it we frustrating me for a while and now I am so close and just want to see mine fully working.  

Also on the xmd issue I saw that a couple times with mine also.  And when I would go back reset my board and redown load the hardware and then the kernel to it it would go away.  But I to see that once n a while.  Have you tried using an older kernel yet?  Prior to the changes since friday and the other night?

Brett


John McGrath <john.mcgrath@xilinx.com>
Sent by: owner-microblaze-uclinux@itee.uq.edu.au

04/22/2005 06:20 AM


To
microblaze-uclinux@itee.uq.edu.au
cc
Subject
Re: [microblaze-uclinux] login issue when booting







Hi,
I am using a very basic V2p7 AFX 456 board, from Xilinx. It doesnt't have an ethernet port or flash, so I usually remove those too. I leave the gpio in, as there are 8 on-board LED's. And 8mb of SDRAM, where i download the image.bin. It looks like I do everything the same as you!

One thing which is curiouis is sometimes the XMD console will report EDK Error -  when the kernel is trying to boot. This leads me to beleive the MB is trying to write something to the XMD console...by any chance is it possible the system starting up is trying to use the XMD uart as the console after boot?

Regarding hyperterminal - if you scroll up more than one page, it always mangles the "history" of what it displayed. I don't know why!
Also, I dont think xon/xof should be used, as I beleive the uartlite does not support hardware flow-control...

Cheers,
John

mcnernbm@notes.udayton.edu wrote:

John,
Suprisingly I did not do a whole lot.  I run an update on my kernel and dist directories.  I then made sure my auto-make file was up to date in the kernel architecture microblaze directory.  Once I had this  I built the kernel with as little as possible.  I took out the ethernet, flash, and gpio drivers.  I also changed the mdm from the flash driver to the generic uclinx rom driver.  then I ran the make dep and make and then booted thejimage.bin file through xmd.  My commands I used where dow -data images/image 0x80000000 and then con 0x80000000.  Simple as that.  But I am still having the issue that is will nto let me login now.  So if it keeps doing this I may still go back and try an older kernel download.  Also what board are you using?
Brett

John McGrath <john.mcgrath@xilinx.com>
Sent by: owner-microblaze-uclinux@itee.uq.edu.au

04/21/2005 04:31 PM



To
microblaze-uclinux@itee.uq.edu.au
cc
Subject
Re: [microblaze-uclinux] login issue when booting






Hi
It seems like you got past the previous problem you were having, detailed in the "booting uclinux" thread. How did you do this? I am still "hanging" at the line

uclinux[mtd]: root filesystem index=0
VFS: Mounted root (romfs filesystem) readonly.
Freeing init memory: 32K


Can you help?

Cheers
John

mcnernbm@notes.udayton.edu wrote:

When booting the uclinux on a memec v2p board I get the results below.  But once it hits the login part I can not login.  I have tried root as the username and pass and jsut root as used and no pass and I can nto get it to login.  Also there is the one fail listed and not sure if that is causing me a problem or not.  Also the only thing I changed when I built the kerneal is I disable the ethernet and networking stuff and the gpio driver and I also changed the MDM to the generic rom selection.  All other option I left alone.

zone(0): 8192 pages.ash device at locati
zone(1): 0 pages.rch for id:(00 00
zone(2): 0 pages.pe(2)rning: dev (
CPU: MICROBLAZErch for id:(00
Kernel command line:e
MBVanil
CFI: Found
Console: xmbserial on UARTLitero00 00) interleave(2) type(1)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Microblaze UARTlite serial driver version 1.00
ttyS0 at 0xffff2000 (irq = 1) is a Microblaze UARTlite
Starting kswapd
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
uclinux[mtd]: RAM probe address=0x800c58fc size=0xb2000
uclinux[mtd]: root filesystem index=0
VFS: Mounted root (romfs filesystem) readonly.
Freeing init memory: 32K
Mounting proc:
Mounting var:
Populating /var:
Running local start scripts.
Mounting /etc/config:
Populating /etc/config:
flatfsd: Nonexistent or bad flatfs (-43), creating new one...
flatfsd: Failed to write flatfs (-43): No such device
flatfsd: Created 3 configuration files (142 bytes)
Setting hostname:

uclinux-auto login:

THanks for the help
Brett # ##############################################################################
# Created by Base System Builder Wizard for Xilinx EDK 6.3 Build EDK_Gmm.11.2
# Mon Mar 21 21:41:48 2005
# Target Board:  Xilinx AFX Virtex-II Pro fg456 Proto Board Rev C
# Family:                  virtex2p
# Device:                  XC2VP7
# Package:                  FG456
# Speed Grade:                  -6
# Processor: Microblaze
# System clock frequency: 50.000000 MHz
# Debug interface: On-Chip HW Debug Module
# On Chip Memory :   8 KB
# Total Off Chip Memory :   8 MB
# - SDRAM_8Mx32 =   8 MB
# ##############################################################################


PARAMETER VERSION = 2.1.0


PORT fpga_0_RS232_RX_pin = fpga_0_RS232_RX, DIR = INPUT
PORT fpga_0_RS232_TX_pin = fpga_0_RS232_TX, DIR = OUTPUT
PORT fpga_0_RS232_req_to_send_pin = net_gnd, DIR = OUTPUT
PORT fpga_0_LEDs_8Bit_GPIO_d_out_pin = fpga_0_LEDs_8Bit_GPIO_d_out, VEC = [0:7], DIR = OUTPUT
PORT fpga_0_SDRAM_8Mx32_SDRAM_DQ_pin = fpga_0_SDRAM_8Mx32_SDRAM_DQ, VEC = [0:31], DIR = INOUT
PORT fpga_0_SDRAM_8Mx32_SDRAM_Addr_pin = fpga_0_SDRAM_8Mx32_SDRAM_Addr, VEC = [0:10], DIR = OUTPUT
PORT fpga_0_SDRAM_8Mx32_SDRAM_DQM_pin = fpga_0_SDRAM_8Mx32_SDRAM_DQM, VEC = [0:3], DIR = OUTPUT
PORT fpga_0_SDRAM_8Mx32_SDRAM_WEn_pin = fpga_0_SDRAM_8Mx32_SDRAM_WEn, DIR = OUTPUT
PORT fpga_0_SDRAM_8Mx32_SDRAM_CKE_pin = fpga_0_SDRAM_8Mx32_SDRAM_CKE, DIR = OUTPUT
PORT fpga_0_SDRAM_8Mx32_SDRAM_CASn_pin = fpga_0_SDRAM_8Mx32_SDRAM_CASn, DIR = OUTPUT
PORT fpga_0_SDRAM_8Mx32_SDRAM_RASn_pin = fpga_0_SDRAM_8Mx32_SDRAM_RASn, DIR = OUTPUT
PORT sys_clk_pin = sys_clk_s, DIR = INPUT, SIGIS = CLK
PORT sys_rst_pin = sys_rst_s, DIR = INPUT


BEGIN microblaze
PARAMETER INSTANCE = microblaze_0
PARAMETER HW_VER = 3.00.a
PARAMETER C_USE_BARREL = 1
PARAMETER C_USE_DIV = 1
PARAMETER C_USE_MSR_INSTR = 1
PARAMETER C_DEBUG_ENABLED = 1
PARAMETER C_NUMBER_OF_PC_BRK = 2
PARAMETER C_NUMBER_OF_RD_ADDR_BRK = 1
PARAMETER C_NUMBER_OF_WR_ADDR_BRK = 1
PARAMETER C_FSL_LINKS = 1
BUS_INTERFACE SFSL0 = download_link
BUS_INTERFACE DLMB = lmb_v10_1
BUS_INTERFACE ILMB = lmb_v10_0
BUS_INTERFACE DOPB = opb_v20_0
BUS_INTERFACE IOPB = opb_v20_0
PORT CLK = sys_clk_s
PORT Interrupt = ext_irq
END

BEGIN opb_v20
PARAMETER INSTANCE = opb_v20_0
PARAMETER HW_VER = 1.10.b
PARAMETER C_EXT_RESET_HIGH = 0
PORT SYS_Rst = sys_rst_s
PORT OPB_Clk = sys_clk_s
END

BEGIN opb_mdm
PARAMETER INSTANCE = opb_mdm_0
PARAMETER HW_VER = 2.01.a
PARAMETER C_BASEADDR = 0xfffe8000
PARAMETER C_HIGHADDR = 0xfffe80ff
PARAMETER C_MB_DBG_PORTS = 1
PARAMETER C_USE_UART = 1
PARAMETER C_UART_WIDTH = 8
PARAMETER C_WRITE_FSL_PORTS = 1
BUS_INTERFACE SOPB = opb_v20_0
BUS_INTERFACE MFSL0 = download_link
PORT Interrupt = mdm_intr
END

BEGIN lmb_v10
PARAMETER INSTANCE = lmb_v10_1
PARAMETER HW_VER = 1.00.a
PARAMETER C_EXT_RESET_HIGH = 0
PORT SYS_Rst = sys_rst_s
PORT LMB_Clk = sys_clk_s
END

BEGIN lmb_v10
PARAMETER INSTANCE = lmb_v10_0
PARAMETER HW_VER = 1.00.a
PARAMETER C_EXT_RESET_HIGH = 0
PORT SYS_Rst = sys_rst_s
PORT LMB_Clk = sys_clk_s
END

BEGIN lmb_bram_if_cntlr
PARAMETER INSTANCE = lmb_bram_if_cntlr_0
PARAMETER HW_VER = 1.00.b
PARAMETER C_BASEADDR = 0x0000_0000
PARAMETER C_HIGHADDR = 0x0000_7fff
BUS_INTERFACE SLMB = lmb_v10_1
BUS_INTERFACE BRAM_PORT = conn_0
END

BEGIN lmb_bram_if_cntlr
PARAMETER INSTANCE = lmb_bram_if_cntlr_1
PARAMETER HW_VER = 1.00.b
PARAMETER C_BASEADDR = 0x0000_0000
PARAMETER C_HIGHADDR = 0x0000_7fff
BUS_INTERFACE SLMB = lmb_v10_0
BUS_INTERFACE BRAM_PORT = conn_1
END


BEGIN bram_block
PARAMETER INSTANCE = bram_block_0
PARAMETER HW_VER = 1.00.a
BUS_INTERFACE PORTA = conn_0
BUS_INTERFACE PORTB = conn_1
END

BEGIN opb_uartlite
PARAMETER INSTANCE = console_uart
PARAMETER HW_VER = 1.00.b
PARAMETER C_BAUDRATE = 115200
PARAMETER C_DATA_BITS = 8
PARAMETER C_USE_PARITY = 0
PARAMETER C_ODD_PARITY = 0
PARAMETER C_CLK_FREQ = 50_000_000
PARAMETER C_BASEADDR = 0xa0000000
PARAMETER C_HIGHADDR = 0xa0001fff
BUS_INTERFACE SOPB = opb_v20_0
PORT Interrupt = uart_intr
PORT OPB_Clk = sys_clk_s
PORT RX = fpga_0_RS232_RX
PORT TX = fpga_0_RS232_TX
END

BEGIN opb_gpio
PARAMETER INSTANCE = LEDs_8Bit
PARAMETER HW_VER = 3.01.a
PARAMETER C_GPIO_WIDTH = 8
PARAMETER C_IS_DUAL = 0
PARAMETER C_IS_BIDIR = 0
PARAMETER C_ALL_INPUTS = 0
PARAMETER C_BASEADDR = 0x81020000
PARAMETER C_HIGHADDR = 0x8102ffff
BUS_INTERFACE SOPB = opb_v20_0
PORT OPB_Clk = sys_clk_s
PORT GPIO_d_out = fpga_0_LEDs_8Bit_GPIO_d_out
END

BEGIN opb_sdram
PARAMETER INSTANCE = SDRAM_8Mx32
PARAMETER HW_VER = 1.00.e
PARAMETER C_INCLUDE_HIGHSPEED_PIPE = 1
PARAMETER C_OPB_CLK_PERIOD_PS = 20000
PARAMETER C_SDRAM_TCCD = 1
PARAMETER C_SDRAM_TRAS = 50000
PARAMETER C_SDRAM_TRC = 100000
PARAMETER C_SDRAM_TRFC = 100000
PARAMETER C_SDRAM_TRCD = 20000
PARAMETER C_SDRAM_TRRD = 20000
PARAMETER C_SDRAM_TRP = 20000
PARAMETER C_SDRAM_TREF = 64
PARAMETER C_SDRAM_CAS_LAT = 2
PARAMETER C_SDRAM_COL_AWIDTH = 8
PARAMETER C_SDRAM_BANK_AWIDTH = 2
PARAMETER C_SDRAM_AWIDTH = 11
PARAMETER C_SDRAM_DWIDTH = 32
PARAMETER C_BASEADDR = 0x81800000
PARAMETER C_HIGHADDR = 0x81ffffff
BUS_INTERFACE SOPB = opb_v20_0
PORT OPB_Clk = sys_clk_s
PORT SDRAM_CLK_in = sys_clk_s
PORT SDRAM_DQ = fpga_0_SDRAM_8Mx32_SDRAM_DQ
PORT SDRAM_Addr = fpga_0_SDRAM_8Mx32_SDRAM_Addr
PORT SDRAM_DQM = fpga_0_SDRAM_8Mx32_SDRAM_DQM
PORT SDRAM_WEn = fpga_0_SDRAM_8Mx32_SDRAM_WEn
PORT SDRAM_CKE = fpga_0_SDRAM_8Mx32_SDRAM_CKE
PORT SDRAM_CASn = fpga_0_SDRAM_8Mx32_SDRAM_CASn
PORT SDRAM_RASn = fpga_0_SDRAM_8Mx32_SDRAM_RASn
END

# add new stuff not in the defualt project
BEGIN fsl_v20
PARAMETER INSTANCE = download_link
PARAMETER HW_VER = 2.00.a
PARAMETER C_EXT_RESET_HIGH = 0
PORT SYS_Rst = sys_rst_s
PORT FSL_Clk = sys_clk_s
END

BEGIN opb_intc
PARAMETER INSTANCE = opb_intc_0
PARAMETER HW_VER = 1.00.c
PARAMETER C_BASEADDR = 0xD1000FC0
PARAMETER C_HIGHADDR = 0xD1000FDF
BUS_INTERFACE SOPB = opb_v20_0
PORT OPB_Clk = sys_clk_s
PORT Intr = mdm_intr & uart_intr & timer_intr
PORT Irq = ext_irq
END

BEGIN opb_timer
PARAMETER INSTANCE = opb_timer_0
PARAMETER HW_VER = 1.00.b
PARAMETER C_COUNT_WIDTH = 32
PARAMETER C_ONE_TIMER_ONLY = 0
PARAMETER C_BASEADDR = 0xa2000000
PARAMETER C_HIGHADDR = 0xa20000ff
BUS_INTERFACE SOPB = opb_v20_0
PORT OPB_Clk = sys_clk_s
PORT Interrupt = timer_intr
END


PARAMETER VERSION = 2.2.0


BEGIN OS
PARAMETER OS_NAME = uclinux
PARAMETER OS_VER = 1.00.a
PARAMETER PROC_INSTANCE = microblaze_0
PARAMETER stdin = console_uart
PARAMETER stdout = console_uart
PARAMETER main_memory = SDRAM_8Mx32
PARAMETER flash_memory = none
PARAMETER lmb_memory = lmb_bram_if_cntlr_0
PARAMETER target_dir = /home/jmcgrath/projects/uClinux/CVS_dl/Try_2104/uClinux-dist/linux-2.4.x/arch/microblaze/platform/uclinux-auto
END


# override the peripheral type of the USB_EMC
# PARAMETER periph_type_overrides = {opb_emc_usb_0 opb_cypress_usb}
BEGIN PROCESSOR
PARAMETER DRIVER_NAME = cpu
PARAMETER DRIVER_VER = 1.00.a
PARAMETER HW_INSTANCE = microblaze_0
PARAMETER COMPILER = mb-gcc
PARAMETER ARCHIVER = mb-ar
PARAMETER CORE_CLOCK_FREQ_HZ = 50000000
END


BEGIN DRIVER
PARAMETER DRIVER_NAME = uartlite
PARAMETER DRIVER_VER = 1.00.b
PARAMETER HW_INSTANCE = opb_mdm_0
END


BEGIN DRIVER
PARAMETER DRIVER_NAME = bram
PARAMETER DRIVER_VER = 1.00.a
PARAMETER HW_INSTANCE = lmb_bram_if_cntlr_0
END

BEGIN DRIVER
PARAMETER DRIVER_NAME = bram
PARAMETER DRIVER_VER = 1.00.a
PARAMETER HW_INSTANCE = lmb_bram_if_cntlr_1
END

BEGIN DRIVER
PARAMETER HW_INSTANCE = console_uart
PARAMETER DRIVER_NAME = uartlite
PARAMETER DRIVER_VER = 1.00.b
END

BEGIN DRIVER
PARAMETER DRIVER_NAME = gpio
PARAMETER DRIVER_VER = 2.00.a
PARAMETER HW_INSTANCE = LEDs_8Bit
END

BEGIN DRIVER
PARAMETER DRIVER_NAME = sdram
PARAMETER DRIVER_VER = 1.00.a
PARAMETER HW_INSTANCE = SDRAM_8Mx32
END

# new blocks added
BEGIN DRIVER
PARAMETER DRIVER_NAME = tmrctr
PARAMETER DRIVER_VER = 1.00.b
PARAMETER HW_INSTANCE = opb_timer_0
END

BEGIN DRIVER
PARAMETER DRIVER_NAME = intc
PARAMETER DRIVER_VER = 1.00.c
PARAMETER HW_INSTANCE = opb_intc_0
END


############################################################
#
# CAUTION: This file is automatically generated by libgen.
# Version: Xilinx EDK 6.3 EDK_Gmm.12.3
# Description: uClinux Configuration File
#
############################################################



# MAIN_MEMORY Settings
define_hex CONFIG_XILINX_ERAM_START 0x81800000
define_hex CONFIG_XILINX_ERAM_SIZE 0x00800000

# LMB_MEMORY Settings
define_hex CONFIG_XILINX_LMB_START 0x00000000
define_hex CONFIG_XILINX_LMB_SIZE 0x00008000

# System Clock Frequency
define_int CONFIG_XILINX_CPU_CLOCK_FREQ 50000000

# Definitions for MICROBLAZE0
define_string CONFIG_XILINX_MICROBLAZE0_INSTANCE microblaze_0
define_string CONFIG_XILINX_MICROBLAZE0_FAMILY virtex2p
define_string CONFIG_XILINX_MICROBLAZE0_INSTANCE microblaze_0
define_int CONFIG_XILINX_MICROBLAZE0_D_OPB 1
define_int CONFIG_XILINX_MICROBLAZE0_D_LMB 1
define_int CONFIG_XILINX_MICROBLAZE0_I_OPB 1
define_int CONFIG_XILINX_MICROBLAZE0_I_LMB 1
define_int CONFIG_XILINX_MICROBLAZE0_USE_BARREL 1
define_int CONFIG_XILINX_MICROBLAZE0_USE_DIV 1
define_int CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR 1
define_int CONFIG_XILINX_MICROBLAZE0_UNALIGNED_EXCEPTIONS 0
define_int CONFIG_XILINX_MICROBLAZE0_ILL_OPCODE_EXCEPTION 0
define_int CONFIG_XILINX_MICROBLAZE0_IOPB_BUS_EXCEPTION 0
define_int CONFIG_XILINX_MICROBLAZE0_DOPB_BUS_EXCEPTION 0
define_int CONFIG_XILINX_MICROBLAZE0_DIV_ZERO_EXCEPTION 0
define_int CONFIG_XILINX_MICROBLAZE0_DEBUG_ENABLED 1
define_int CONFIG_XILINX_MICROBLAZE0_NUMBER_OF_PBRK 2
define_int CONFIG_XILINX_MICROBLAZE0_NUMBER_OF_RD_ADDR_BRK 1
define_int CONFIG_XILINX_MICROBLAZE0_NUMBER_OF_WR_ADDR_BRK 1
define_int CONFIG_XILINX_MICROBLAZE0_INTERRUPT_IS_EDGE 0
define_int CONFIG_XILINX_MICROBLAZE0_EDGE_IS_POSITIVE 1
define_int CONFIG_XILINX_MICROBLAZE0_FSL_LINKS 1
define_int CONFIG_XILINX_MICROBLAZE0_FSL_DATA_SIZE 32
define_hex CONFIG_XILINX_MICROBLAZE0_ICACHE_BASEADDR 0x00000000
define_hex CONFIG_XILINX_MICROBLAZE0_ICACHE_HIGHADDR 0x3FFFFFFF
define_int CONFIG_XILINX_MICROBLAZE0_USE_ICACHE 0
define_int CONFIG_XILINX_MICROBLAZE0_ALLOW_ICACHE_WR 1
define_int CONFIG_XILINX_MICROBLAZE0_ADDR_TAG_BITS 17
define_int CONFIG_XILINX_MICROBLAZE0_CACHE_BYTE_SIZE 8192
define_int CONFIG_XILINX_MICROBLAZE0_ICACHE_USE_FSL 0
define_hex CONFIG_XILINX_MICROBLAZE0_DCACHE_BASEADDR 0x00000000
define_hex CONFIG_XILINX_MICROBLAZE0_DCACHE_HIGHADDR 0x3FFFFFFF
define_int CONFIG_XILINX_MICROBLAZE0_USE_DCACHE 0
define_int CONFIG_XILINX_MICROBLAZE0_ALLOW_DCACHE_WR 1
define_int CONFIG_XILINX_MICROBLAZE0_DCACHE_ADDR_TAG 17
define_int CONFIG_XILINX_MICROBLAZE0_DCACHE_BYTE_SIZE 8192
define_int CONFIG_XILINX_MICROBLAZE0_DCACHE_USE_FSL 0
define_string CONFIG_XILINX_MICROBLAZE0_INSTANCE microblaze_0
define_string CONFIG_XILINX_MICROBLAZE0_HW_VER 3.00.a

# Definitions for LMB_BRAM_IF_CNTLR_0
define_string CONFIG_XILINX_LMB_BRAM_IF_CNTLR_0_INSTANCE lmb_bram_if_cntlr_0
define_hex CONFIG_XILINX_LMB_BRAM_IF_CNTLR_0_BASEADDR 0x00000000
define_hex CONFIG_XILINX_LMB_BRAM_IF_CNTLR_0_HIGHADDR 0x00007FFF
define_hex CONFIG_XILINX_LMB_BRAM_IF_CNTLR_0_MASK 0x21000000
define_int CONFIG_XILINX_LMB_BRAM_IF_CNTLR_0_LMB_AWIDTH 32
define_int CONFIG_XILINX_LMB_BRAM_IF_CNTLR_0_LMB_DWIDTH 32
define_string CONFIG_XILINX_LMB_BRAM_IF_CNTLR_0_INSTANCE lmb_bram_if_cntlr_0
define_string CONFIG_XILINX_LMB_BRAM_IF_CNTLR_0_HW_VER 1.00.b

# Definitions for LMB_BRAM_IF_CNTLR_1
define_string CONFIG_XILINX_LMB_BRAM_IF_CNTLR_1_INSTANCE lmb_bram_if_cntlr_1
define_hex CONFIG_XILINX_LMB_BRAM_IF_CNTLR_1_BASEADDR 0x00000000
define_hex CONFIG_XILINX_LMB_BRAM_IF_CNTLR_1_HIGHADDR 0x00007FFF
define_hex CONFIG_XILINX_LMB_BRAM_IF_CNTLR_1_MASK 0x21000000
define_int CONFIG_XILINX_LMB_BRAM_IF_CNTLR_1_LMB_AWIDTH 32
define_int CONFIG_XILINX_LMB_BRAM_IF_CNTLR_1_LMB_DWIDTH 32
define_string CONFIG_XILINX_LMB_BRAM_IF_CNTLR_1_INSTANCE lmb_bram_if_cntlr_1
define_string CONFIG_XILINX_LMB_BRAM_IF_CNTLR_1_HW_VER 1.00.b

# Definitions for MDM_0
define_string CONFIG_XILINX_MDM_0_INSTANCE opb_mdm_0
define_hex CONFIG_XILINX_MDM_0_BASEADDR 0xFFFE8000
define_hex CONFIG_XILINX_MDM_0_HIGHADDR 0xFFFE80FF
define_int CONFIG_XILINX_MDM_0_OPB_DWIDTH 32
define_int CONFIG_XILINX_MDM_0_OPB_AWIDTH 32
define_string CONFIG_XILINX_MDM_0_FAMILY virtex2p
define_int CONFIG_XILINX_MDM_0_MB_DBG_PORTS 1
define_int CONFIG_XILINX_MDM_0_USE_UART 1
define_int CONFIG_XILINX_MDM_0_UART_WIDTH 8
define_int CONFIG_XILINX_MDM_0_WRITE_FSL_PORTS 1
define_string CONFIG_XILINX_MDM_0_INSTANCE opb_mdm_0
define_string CONFIG_XILINX_MDM_0_HW_VER 2.01.a
define_int CONFIG_XILINX_MDM_0_IRQ 2

# Definitions for UARTLITE_0
define_string CONFIG_XILINX_UARTLITE_0_INSTANCE console_uart
define_hex CONFIG_XILINX_UARTLITE_0_BASEADDR 0xA0000000
define_hex CONFIG_XILINX_UARTLITE_0_HIGHADDR 0xA0001FFF
define_int CONFIG_XILINX_UARTLITE_0_OPB_DWIDTH 32
define_int CONFIG_XILINX_UARTLITE_0_OPB_AWIDTH 32
define_int CONFIG_XILINX_UARTLITE_0_DATA_BITS 8
define_int CONFIG_XILINX_UARTLITE_0_CLK_FREQ 50000000
define_int CONFIG_XILINX_UARTLITE_0_BAUDRATE 115200
define_int CONFIG_XILINX_UARTLITE_0_USE_PARITY 0
define_int CONFIG_XILINX_UARTLITE_0_ODD_PARITY 0
define_string CONFIG_XILINX_UARTLITE_0_INSTANCE console_uart
define_string CONFIG_XILINX_UARTLITE_0_HW_VER 1.00.b
define_int CONFIG_XILINX_UARTLITE_0_IRQ 1

# Definitions for GPIO_0
define_string CONFIG_XILINX_GPIO_0_INSTANCE LEDs_8Bit
define_hex CONFIG_XILINX_GPIO_0_BASEADDR 0x81020000
define_hex CONFIG_XILINX_GPIO_0_HIGHADDR 0x8102FFFF
define_int CONFIG_XILINX_GPIO_0_USER_ID_CODE 3
define_int CONFIG_XILINX_GPIO_0_OPB_AWIDTH 32
define_int CONFIG_XILINX_GPIO_0_OPB_DWIDTH 32
define_string CONFIG_XILINX_GPIO_0_FAMILY virtex2p
define_int CONFIG_XILINX_GPIO_0_GPIO_WIDTH 8
define_int CONFIG_XILINX_GPIO_0_ALL_INPUTS 0
define_int CONFIG_XILINX_GPIO_0_INTERRUPT_PRESENT 0
define_int CONFIG_XILINX_GPIO_0_IS_BIDIR 0
define_hex CONFIG_XILINX_GPIO_0_DOUT_DEFAULT 0x00000000
define_hex CONFIG_XILINX_GPIO_0_TRI_DEFAULT 0xFFFFFFFF
define_int CONFIG_XILINX_GPIO_0_IS_DUAL 0
define_int CONFIG_XILINX_GPIO_0_ALL_INPUTS_2 0
define_int CONFIG_XILINX_GPIO_0_IS_BIDIR_2 1
define_hex CONFIG_XILINX_GPIO_0_DOUT_DEFAULT_2 0x00000000
define_hex CONFIG_XILINX_GPIO_0_TRI_DEFAULT_2 0xFFFFFFFF
define_string CONFIG_XILINX_GPIO_0_INSTANCE LEDs_8Bit
define_string CONFIG_XILINX_GPIO_0_HW_VER 3.01.a

# Definitions for SDRAM_0
define_string CONFIG_XILINX_SDRAM_0_INSTANCE SDRAM_8Mx32
define_int CONFIG_XILINX_SDRAM_0_INCLUDE_BURST_SUPPORT 1
define_int CONFIG_XILINX_SDRAM_0_INCLUDE_HIGHSPEED_PIPE 1
define_int CONFIG_XILINX_SDRAM_0_USE_POSEDGE_OUTREGS 0
define_string CONFIG_XILINX_SDRAM_0_FAMILY virtex2p
define_int CONFIG_XILINX_SDRAM_0_SDRAM_TMRD 2
define_int CONFIG_XILINX_SDRAM_0_SDRAM_TWR 15000
define_int CONFIG_XILINX_SDRAM_0_SDRAM_TCCD 1
define_int CONFIG_XILINX_SDRAM_0_SDRAM_TRAS 50000
define_int CONFIG_XILINX_SDRAM_0_SDRAM_TRC 100000
define_int CONFIG_XILINX_SDRAM_0_SDRAM_TRFC 100000
define_int CONFIG_XILINX_SDRAM_0_SDRAM_TRCD 20000
define_int CONFIG_XILINX_SDRAM_0_SDRAM_TRRD 20000
define_int CONFIG_XILINX_SDRAM_0_SDRAM_TRP 20000
define_int CONFIG_XILINX_SDRAM_0_SDRAM_TREF 64
define_int CONFIG_XILINX_SDRAM_0_SDRAM_REFRESH_NUMROWS 8192
define_int CONFIG_XILINX_SDRAM_0_SDRAM_CAS_LAT 2
define_int CONFIG_XILINX_SDRAM_0_SDRAM_DWIDTH 32
define_int CONFIG_XILINX_SDRAM_0_SDRAM_AWIDTH 11
define_int CONFIG_XILINX_SDRAM_0_SDRAM_COL_AWIDTH 8
define_int CONFIG_XILINX_SDRAM_0_SDRAM_BANK_AWIDTH 2
define_int CONFIG_XILINX_SDRAM_0_SDRAM_TREFI 7812500
define_hex CONFIG_XILINX_SDRAM_0_BASEADDR 0x81800000
define_hex CONFIG_XILINX_SDRAM_0_HIGHADDR 0x81FFFFFF
define_int CONFIG_XILINX_SDRAM_0_OPB_DWIDTH 32
define_int CONFIG_XILINX_SDRAM_0_OPB_AWIDTH 32
define_int CONFIG_XILINX_SDRAM_0_OPB_CLK_PERIOD_PS 20000
define_int CONFIG_XILINX_SDRAM_0_SIM_INIT_TIME_PS 100000000
define_string CONFIG_XILINX_SDRAM_0_INSTANCE SDRAM_8Mx32
define_string CONFIG_XILINX_SDRAM_0_HW_VER 1.00.e

# Definitions for INTC_0
define_string CONFIG_XILINX_INTC_0_INSTANCE opb_intc_0
define_string CONFIG_XILINX_INTC_0_FAMILY virtex2p
define_int CONFIG_XILINX_INTC_0_Y 0
define_int CONFIG_XILINX_INTC_0_X 0
define_string CONFIG_XILINX_INTC_0_U_SET intc
define_int CONFIG_XILINX_INTC_0_OPB_AWIDTH 32
define_int CONFIG_XILINX_INTC_0_OPB_DWIDTH 32
define_hex CONFIG_XILINX_INTC_0_BASEADDR 0xD1000FC0
define_hex CONFIG_XILINX_INTC_0_HIGHADDR 0xD1000FDF
define_int CONFIG_XILINX_INTC_0_NUM_INTR_INPUTS 3
define_hex CONFIG_XILINX_INTC_0_KIND_OF_INTR 0x00000006
define_hex CONFIG_XILINX_INTC_0_KIND_OF_EDGE 0x00000006
define_hex CONFIG_XILINX_INTC_0_KIND_OF_LVL 0x00000001
define_int CONFIG_XILINX_INTC_0_HAS_IPR 1
define_int CONFIG_XILINX_INTC_0_HAS_SIE 1
define_int CONFIG_XILINX_INTC_0_HAS_CIE 1
define_int CONFIG_XILINX_INTC_0_HAS_IVR 1
define_int CONFIG_XILINX_INTC_0_IRQ_IS_LEVEL 1
define_int CONFIG_XILINX_INTC_0_IRQ_ACTIVE 1
define_string CONFIG_XILINX_INTC_0_INSTANCE opb_intc_0
define_string CONFIG_XILINX_INTC_0_HW_VER 1.00.c

# Definitions for TIMER_0
define_string CONFIG_XILINX_TIMER_0_INSTANCE opb_timer_0
define_string CONFIG_XILINX_TIMER_0_FAMILY virtex2p
define_int CONFIG_XILINX_TIMER_0_COUNT_WIDTH 32
define_int CONFIG_XILINX_TIMER_0_ONE_TIMER_ONLY 0
define_int CONFIG_XILINX_TIMER_0_TRIG0_ASSERT 1
define_int CONFIG_XILINX_TIMER_0_TRIG1_ASSERT 1
define_int CONFIG_XILINX_TIMER_0_GEN0_ASSERT 1
define_int CONFIG_XILINX_TIMER_0_GEN1_ASSERT 1
define_int CONFIG_XILINX_TIMER_0_OPB_AWIDTH 32
define_int CONFIG_XILINX_TIMER_0_OPB_DWIDTH 32
define_hex CONFIG_XILINX_TIMER_0_BASEADDR 0xA2000000
define_hex CONFIG_XILINX_TIMER_0_HIGHADDR 0xA20000FF
define_string CONFIG_XILINX_TIMER_0_INSTANCE opb_timer_0
define_string CONFIG_XILINX_TIMER_0_HW_VER 1.00.b
define_int CONFIG_XILINX_TIMER_0_IRQ 0

# Peripheral counts
define_int CONFIG_XILINX_LMB_BRAM_IF_CNTLR_NUM_INSTANCES 2
define_int CONFIG_XILINX_TIMER_NUM_INSTANCES 1
define_int CONFIG_XILINX_INTC_NUM_INSTANCES 1
define_int CONFIG_XILINX_UARTLITE_NUM_INSTANCES 1
define_int CONFIG_XILINX_MDM_NUM_INSTANCES 1
define_int CONFIG_XILINX_SDRAM_NUM_INSTANCES 1
define_int CONFIG_XILINX_GPIO_NUM_INSTANCES 1

Attachment: system.mss
Description: Binary data

Attachment: system.mhs
Description: Binary data