RE: [microblaze-uclinux] Ethernetlite

["wlovell" <wlovell@xxxxxxxxxxxxxxxxx>]

John, thank you for the information.

William Lovell, Senior Design Engineer

PSoC & Xilinx Consultant

c-Link Systems, Inc.

212 Eddie Kahkonen Rd.

Norway, ME 04268-5312

P - 207-743-0002

wlovell@c-linksystems.com <mailto:wlovell@c-linksystems.com>

www.c-linksystems.com <http://www.c-linksystems.com>



-----Original Message-----
From: John Williams [mailto:jwilliams@itee.uq.edu.au]
Sent: Saturday, May 21, 2005 0:18 AM
To: microblaze-uclinux@itee.uq.edu.au
Subject: Re: [microblaze-uclinux] Ethernetlite


Hi Mike, Bill,

Mike Wehrer wrote:

> I don’t think you’re crazy; however, this project is driving me toward
> that destination. The problem that I am having, is that I can find
> nowhere in the xemac or any other driver, references to the following
> configuration parameters.
>
> CONFIG_XILINX_ETHERNETLITE_0_INSTANCE Intel_LXR971A_Tranceiver

[snip]

drivers/net/xilinx_emac is for the full emac, not the lite version.

I'm not aware of Linux/uClinux driver support for the EthernetLite -
I've certainly never tried it.  It might be worth browsing the PPC tree,
see if there's a Montavista driver available for the taking.

Regards,

John

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive :
http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/





___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/