[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [microblaze-uclinux] how can I port UClinux without Ethernet Port?

Thanks a lot John, but... I'm really newbie trying to port uCLinux on
any system. I think that I need a very basic help about all this
process. I already configured a microblaze system on my custom board
but I have trouble with what comes next. I will be grateful if you
show me any reference which could guide me. I have been looking for
those auto-config reference designs, but I didn't find any.

Thanks a lot, again.


On 5/29/05, John Williams <jwilliams@itee.uq.edu.au> wrote:
> Hi William
> 
> Willi@m Serr@to wrote:
> 
> > I have some trouble in to port uCLinux on a microblaze system in a
> > S3XS400 board that I designed with 2 RS232 serial ports, 4 leds and
> > 128 MB SDRAM.
> >
> > I want now to port uCLinux on this target, but every documentation
> > I read says that this process uses an Ethernet Port which is not
> > present on the board.
> 
> The no-ethernet part is easy, just disable the ethernet driver in the
> kernel configuration menu, under "Processor settings"
> 
> For the main port, you should look at one of the auto-config reference
> designs on the website, and see the settings you need in your MSS file
> to generate the auto-config.in file.  This iwll automatically configure
> the kernel for your hardware.  Then you should read the file
> uClinux-2.4.x/Documentation/Microblaze/adding-platforms-howto.txt to see
> how to include your new platform into the uclinux kernel.
> 
> Regards,
> 
> John
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@itee.uq.edu.au
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
> 
> 


-- 
Willi@m

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/