[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [microblaze-uclinux] XMD Crashing using NuHo reference design

To: <microblaze-uclinux@xxxxxxxxxxxxxx>
Subject: RE: [microblaze-uclinux] XMD Crashing using NuHo reference design
From: "David Banas" <dbanas@xxxxxxxxxxxxxx>
Date: Tue, 19 Jul 2005 07:08:13 -0700
In-reply-to: <003c01c58b97$1dc88410$2900a8c0@dt109>
Reply-to: microblaze-uclinux@xxxxxxxxxxxxxx
Sender: owner-microblaze-uclinux@xxxxxxxxxxxxxx
Thread-index: AcWLnCHoo9Uzl+LwSB+drN6HBkk8zgAzrrMA

Hi Jim,

Sorry to hear you're having trouble.

The following portion of your XMD output looks very strange:

> Closing JTAG Socket connection
>
> Unable to Open Socket connection to Modelsim at Address: (null), Port:
> 44428224

Firstly, if it closes the JTAG connection, it won't be able to talk to the
board. Secondly, why is it trying to connect to ModelSim?!

Have you opened a Xilinx WebCase on this yet? If not, please, do and include
this strange XMD output.

Thanks,

David Banas
Field Applications Engineer
Nu Horizons Electronics Corp.
2070 Ringwood Avenue
San Jose, CA 95131
(408)434-0800 - office
(415)846-5837 - cell
http://www.nuhorizons.com
> -----Original Message-----
> From: owner-microblaze-uclinux@itee.uq.edu.au [mailto:owner-microblaze-
> uclinux@itee.uq.edu.au] On Behalf Of Jim Law
> Sent: Monday, July 18, 2005 5:49 AM
> To: microblaze-uclinux@itee.uq.edu.au
> Subject: Re: [microblaze-uclinux] XMD Crashing using NuHo reference design
>
> Here is the XMD output:
> --------------------------------------------
> Xilinx Microprocessor Debug (XMD) Engine
> Xilinx EDK 7.1 Build EDK_H.10.4
> Copyright (c) 1995-2005 Xilinx, Inc.  All rights reserved.
>
> XMD%
> Loading XMP File..
> WARNING:Portability:111 - Message file "EDK.msg" wasn't found.
> Processor(s) in System ::
>
> Microblaze(1) : microblaze_0
> Address Map for Processor microblaze_0
>   (0x00000000-0x00003fff) dlmb_cntlr    dlmb
>   (0x00000000-0x00003fff) ilmb_cntlr    ilmb
>   (0xc0000000-0xc0003fff) ethernet      mb_opb
>   (0xfe000000-0xfeffffff) opb_sdram_0   mb_opb
>   (0xff800000-0xffbfffff) sram_flash    mb_opb
>   (0xffff1000-0xffff10ff) system_timer  mb_opb
>   (0xffff2000-0xffff20ff) console_uart  mb_opb
>   (0xffff3000-0xffff30ff) system_intc   mb_opb
>   (0xffff5000-0xffff51ff) system_gpio   mb_opb
>   (0xffffc000-0xffffc0ff) debug_module  mb_opb
>
> Executing Connect Cmd: connect mb mdm -cable type xilinx_parallel port
> LPT1 -debugdevice cpunr 1 -pfsl port 0 type s
> Closing JTAG Socket connection
>
> Unable to Open Socket connection to Modelsim at Address: (null), Port:
> 44428224
>
> Loading MHS File..
> Processor(s) in System ::
>
> Microblaze(1) : microblaze_0
> Address Map for Processor microblaze_0
>   (0x00000000-0x00003fff) dlmb_cntlr    dlmb
>   (0x00000000-0x00003fff) ilmb_cntlr    ilmb
>   (0xc0000000-0xc0003fff) ethernet      mb_opb
>   (0xfe000000-0xfeffffff) opb_sdram_0   mb_opb
>   (0xff800000-0xffbfffff) sram_flash    mb_opb
>   (0xffff1000-0xffff10ff) system_timer  mb_opb
>   (0xffff2000-0xffff20ff) console_uart  mb_opb
>   (0xffff3000-0xffff30ff) system_intc   mb_opb
>   (0xffff5000-0xffff51ff) system_gpio   mb_opb
>   (0xffffc000-0xffffc0ff) debug_module  mb_opb
>
> Microblaze(1) : microblaze_0
> Address Map for Processor microblaze_0
>   (0x00000000-0x00003fff) dlmb_cntlr    dlmb
>   (0x00000000-0x00003fff) ilmb_cntlr    ilmb
>   (0xc0000000-0xc0003fff) ethernet      mb_opb
>   (0xfe000000-0xfeffffff) opb_sdram_0   mb_opb
>   (0xff800000-0xffbfffff) sram_flash    mb_opb
>   (0xffff1000-0xffff10ff) system_timer  mb_opb
>   (0xffff2000-0xffff20ff) console_uart  mb_opb
>   (0xffff3000-0xffff30ff) system_intc   mb_opb
>   (0xffff5000-0xffff51ff) system_gpio   mb_opb
>   (0xffffc000-0xffffc0ff) debug_module  mb_opb
> ------------------------------------------------------------
>
> ----- Original Message -----
> From: "Raj Nagarajan" <raj.nagarajan@xilinx.com>
> To: <microblaze-uclinux@itee.uq.edu.au>
> Sent: Thursday, July 14, 2005 2:20 PM
> Subject: RE: [microblaze-uclinux] XMD Crashing using NuHo reference design
>
>
> > Hi Jim,
> >
> > Can you post the XMD output..
> >
> > -- Raj
> >
> >
> >> -----Original Message-----
> >> From: owner-microblaze-uclinux@itee.uq.edu.au
> >> [mailto:owner-microblaze-uclinux@itee.uq.edu.au] On Behalf Of Jim Law
> >> Sent: Thursday, July 14, 2005 10:02 AM
> >> To: microblaze-uclinux@itee.uq.edu.au
> >> Subject: [microblaze-uclinux] XMD Crashing using NuHo reference design
> >>
> >> Hi all,
> >>
> >> Have:
> >>
> >> NuHo S3-2000 board
> >> Parallel-IV cable
> >> ISE 7.1.03i installed in c:\xilinx7\
> >> EDK 7.1.02i installed in c:\edk7\
> >> ChipScope Pro 7.1.03i
> >> uClinux BSP V1.00a 16mar2005 - unzipped into
> >> c:\edk_user_repository\ Dave Banas'
> >> NuHo_S3-2000_uClinux_Rel2005062301.zip  - unzipped to e:\uClinux_try\
> >>
> >> Followed the Quick Start instructions from Dave Banas:
> >> - copied the VHD files as described (noted that there is a
> >> newer emc_common_v2_00_b\hdl\vhdl core in the directory -
> >> ignored this)
> >> - launched XPS, opened the system.xmp, "download the
> >> bitstream" built and downloaded fine
> >> - can see and talk to the bootloader from HyperTerm fine
> >>
> >> Problem:
> >> - when I launch XMD, it crashes
> >> - I note that the connect command has some extra switches
> >> after the "cpunr 1"  switch.  The full line is:
> >>  "connect mb mdm -cable type xilinx_parallel port LPT1
> >> -debugdevice cpunr
> >> 1 -pfs1 port 0 type s"
> >> - after "Loading MHS File", it shows me the Adress Map twice,
> >> and then gives a Windows report.
> >>
> >> Tried changing the XMD options to Sim - runs ok (but not what
> >> I need <g>) Changed the settings back - same results.
> >>
> >> Thots? anyone?
> >>
> >> Jim Law
> >> Iris Power Engineering
> >>
> >> ___________________________
> >> microblaze-uclinux mailing list
> >> microblaze-uclinux@itee.uq.edu.au
> >> Project Home Page :
> >> http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> >> Mailing List Archive :
> >> http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
> >>
> >>
> >>
> >
> >
> > ___________________________
> > microblaze-uclinux mailing list
> > microblaze-uclinux@itee.uq.edu.au
> > Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> > Mailing List Archive :
> > http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
> >
> >
>
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@itee.uq.edu.au
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-
> uclinux/
>
>
> ________________________________________________________________________
> This email has been scanned for all viruses by the MessageLabs Email
> Security System. For more information on a proactive email security
> service working around the clock, around the globe, visit
> http://www.messagelabs.com
> ________________________________________________________________________


___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/

Follow-Ups:
- [microblaze-uclinux] NuHo 2nd Enet port
  - From: Jim Law

References:
- Re: [microblaze-uclinux] XMD Crashing using NuHo reference design
  - From: Jim Law

Prev by Date: [microblaze-uclinux] GUI ....
Next by Date: Re: [microblaze-uclinux] GUI ....
Previous by thread: Re: [microblaze-uclinux] XMD Crashing using NuHo reference design
Next by thread: [microblaze-uclinux] NuHo 2nd Enet port
Index(es):
- Date
- Thread