Re: [microblaze-uclinux] systemace boot

[calayrac@xxxxxxxxxxxxxxx]

Selon mcnernbm@notes.udayton.edu:

Hi Brett,

I just have recieved the ML403 board from Xilinx. There is information about 
creating the system ace file to boot a montavista distribution kernel.

The link is http://www.xilinx.com/ml403, take a look at the design for mpower 
PC and microblaze. 

A sfar as I understand system ace can load the FPGA at boot time, reading the 
Compact Flash and dowloading the bistream to the FPGA trough the JTAG link. It 
must then download the kernel image to externall memory, set Prog Counter to 
the start adress and start the processor (either PPC ou Microblaze).


> I am trying to get uclinux to boot from the systemace.  I tried to take 
> the .elf file and use the xilinx system ace file creater to create the 
> .ace file to boot the kernel.  What exactly needs to be done to make this 
> work?  Do I need to include the system ace driver when i am building the 
> uclinux kernel? Any help on this would be greatly apprecaited. 
> Thanks
> Brett


Christophe
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/