[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [microblaze-uclinux] Ethernet link loss



Hey Jim, just curious, have you selected a MAC/PHY combo yet? I've been
thinking about doing this for the same reason but haven't yet. All the
combo's I have found want a PCI interface which chews up just as much
logic...

--Tim

-----Original Message-----
From: owner-microblaze-uclinux@itee.uq.edu.au
[mailto:owner-microblaze-uclinux@itee.uq.edu.au] On Behalf Of Jim Law
Sent: Friday, July 22, 2005 12:34 PM
To: microblaze-uclinux@itee.uq.edu.au
Subject: Re: [microblaze-uclinux] Ethernet link loss

Haven't licenced the core - not planning on using it in the final
product: 
will use external MAC/PHY to save room in FPGA for my logic.  I'll have
to 
check if I did a full re-build of the bitstream before my last download
to 
the board, but this sounds like a reasonable explanation.

Thanks,
Jim

----- Original Message ----- 
From: "David Banas" <dbanas@nuhorizons.com>
To: <microblaze-uclinux@itee.uq.edu.au>
Sent: Friday, July 22, 2005 10:18 AM
Subject: RE: [microblaze-uclinux] Ethernet link loss


> Jim,
>
> Do you have a license for the Ethernet MAC core? If not, then this is
the
> behavior one would expect. The evaluation version of that core (which
is
> what ships with EDK) is rigged to stop working after some amount of
time
> after configuration and there have been reports (Xilinx doesn't
actually 
> say
> how long) that the timeout time is on the order of hours.
>
> I used a licensed version, in order to compile the "download.bit"
file,
> which I included in the archive. So, if you're using that file and 
> observing
> this then something else is going on.
>
> Regards,
>
> David Banas
> Field Applications Engineer
> Nu Horizons Electronics Corp.
> 2070 Ringwood Avenue
> San Jose, CA 95131
> (408)434-0800 - office
> (415)846-5837 - cell
> http://www.nuhorizons.com
>
>> -----Original Message-----
>> From: owner-microblaze-uclinux@itee.uq.edu.au
[mailto:owner-microblaze-
>> uclinux@itee.uq.edu.au] On Behalf Of Jim Law
>> Sent: Friday, July 22, 2005 6:33 AM
>> To: microblaze-uclinux@itee.uq.edu.au
>> Subject: [microblaze-uclinux] Ethernet link loss
>>
>> Hi all,
>>
>> Running uClinux on a NuHo S3-2000 board.  Ethernet port connected to
a
>> router that is doing DHCP serving to give out an IP address
>> (192.168.10.3).
>>
>> On kernal boot, I get a
>>
>>      "Jan  1 00:01:34 dhcpcd[33]: infinite IP address lease time. 
>> Exiting"
>>
>> message from the DHCP client daemon in uClinux, even though the
router is
>> setup to give out a 1-hour lease.
>>
>> System stays connected while I watch it (>> 1hour) , but sometime
>> overnight,
>> gives
>>
>>      "eth0: Link carrier lost.".
>>
>> Changing the router to give 1 week leases doesn't change anything.
DHCP
>> server reports that the IP address is still active.  Link light on
router
>> is
>> off.
>>
>> Thot's??
>>
>> Jim Law
>> Iris Power
>>
>>
>> ___________________________
>> microblaze-uclinux mailing list
>> microblaze-uclinux@itee.uq.edu.au
>> Project Home Page :
http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
>> Mailing List Archive :
http://www.itee.uq.edu.au/~listarch/microblaze-
>> uclinux/
>>
>>
>>
________________________________________________________________________
>> This email has been scanned for all viruses by the MessageLabs Email
>> Security System. For more information on a proactive email security
>> service working around the clock, around the globe, visit
>> http://www.messagelabs.com
>>
________________________________________________________________________
>
>
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@itee.uq.edu.au
> Project Home Page :
http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive : 
> http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
>
> 

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive :
http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/


___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/