Re: [microblaze-uclinux] uClinux compile error on "make dep" - dhcp problem

["Jim Law" <jlaw@xxxxxxxxxxxxx>]

Got it!  - Turns out that the actual line in dhcpcd-new that winds up 
starting dhcpcd was commented out (by DBB - David Banas?) and a line 
inserted to run ifconfig for a fixed IP address.  The echo line was still 
there, so I thought the server was being started.

Is there a list anywhere giving the full set of make menuconfig answers that 
are needed?  Found that telnet was giving "All network ports in use" and 
tracked down the discussion here re: the openpty() option - trying that now 
and crossing fingers.  Any other gotcha's like that that anyone can point me 
at?

Jim Law


----- Original Message ----- 
From: "John Williams" <jwilliams@itee.uq.edu.au>
To: <microblaze-uclinux@itee.uq.edu.au>
Sent: Monday, August 15, 2005 5:36 AM
Subject: Re: [microblaze-uclinux] uClinux compile error on "make dep"


> Hi David,
>
> David Lai wrote:
>
>> During kernel build, I have been making an effort in trying to configure 
>> the settings to match that of David Banas'.
>>
>> At kernel boot, 'dhcpcd' is started automatically but the wrong IP 
>> address is assigned.  However, immediately after boot, if 'dhcpcd' is 
>> started manually then the problem is resolved.  Thoughts?
>
> Very strange.  You could sniff the network with tcpdump, it might help you 
> to get some idea what's going on.  Otherwise, not sure what to suggest.
>
> Regards,
>
> John
>
>
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@itee.uq.edu.au
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive : 
> http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
>
> 

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/