Re: [microblaze-uclinux] booting from the flash

[Paul Hartke <phartke@xxxxxxxxxxxx>]

Use SystemAce--documented in the Microblaze uCLinux zip available at either
the microblaze uclinux, Digilent, or Xilinx University Program XUPV2P
websites.

Paul

Quoting Todd Harless <tharless@gmail.com>:
> Hello everyone, I am using the XUP-V2PRO board provided by the
> Digilent,inc company and I was wondering how one might be able to turn
> on the board and have uClinux up and running directly from there. One
> idea I was thinking was of putting the image.bin into the flash on the
> board but I would like to hear some ideas if this would actually work
> or not. It is such a pain to download bootloop.bit first through
> iMPACT, then use XMD to download the image.bin file. It would be so
> nice to just turn on the board and automatically have uClinux up and
> running everytime. I am pretty sure this can be done by putting the
> necessary files in the flash but could someone please give some advice
> on this. Thank you.
>
> Todd Harless
>
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@itee.uq.edu.au
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive :
> http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
>
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/