[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [microblaze-uclinux] StarterKit+uClinux beginer
Wow! Can I look at your *.MHS file to see what you were able to include?
David Banas
Field Applications Engineer
Nu Horizons Electronics Corp.
2070 Ringwood Avenue
San Jose, CA 95131
(408)434-0800 - office
(415)846-5837 - cell
http://www.nuhorizons.com
> -----Original Message-----
> From: owner-microblaze-uclinux@itee.uq.edu.au [mailto:owner-microblaze-
> uclinux@itee.uq.edu.au] On Behalf Of Pavel Ivanchenko
> Sent: Friday, August 19, 2005 11:04 AM
> To: microblaze-uclinux@itee.uq.edu.au
> Subject: Re: [microblaze-uclinux] StarterKit+uClinux beginer
>
> Hi David.
>
> Parts of PAR report:
> Device Utilization Summary:
> Number of BSCANs 1 out of 1 100%
> Number of BUFGMUXs 2 out of 8 25%
> Number of DCMs 1 out of 4 25%
> Number of External IOBs 46 out of 173 26%
> Number of LOCed IOBs 46 out of 46 100%
>
> Number of MULT18X18s 3 out of 12 25%
> Number of RAMB16s 4 out of 12 33%
> Number of Slices 1862 out of 1920 96%
> Number of SLICEMs 338 out of 960 35%
> --------------------------------------------------------------------------
> ------
> Constraint | Requested | Actual |
> Logic
> | | |
> Levels
> --------------------------------------------------------------------------
> ------
> TS_sys_clk_pin = PERIOD TIMEGRP "sys_clk_ | N/A | N/A |
> N/A
> pin" 20 ns HIGH 50% | | |
> --------------------------------------------------------------------------
> ------
> TS_dcm_0_dcm_0_CLK0_BUF = PERIOD TIMEGRP | 20.000ns | 19.926ns | 18
> "dcm_0_dcm_0_CLK0_BUF" TS_sys_clk_pin | | |
> HIGH 50% | | |
> --------------------------------------------------------------------------
> ------
>
> In future I plan create OPB core UART + timer + Interrupt controller, i
> evaluating free ~%30 of chip.
>
> But I do not know how write drivers for this core in context OS.
>
>
> 3.14
>
> ----- Original Message -----
> From: "David Banas" <dbanas@nuhorizons.com>
> To: <microblaze-uclinux@itee.uq.edu.au>
> Sent: Friday, August 19, 2005 8:33 PM
> Subject: RE: [microblaze-uclinux] StarterKit+uClinux beginer
>
>
> > Are you sure that your place&route ran w/o errors? I wasn't aware that
> you
> > could fit this design in a '200.
>
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@itee.uq.edu.au
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-
> uclinux/
>
>
> ________________________________________________________________________
> This email has been scanned for all viruses by the MessageLabs Email
> Security System. For more information on a proactive email security
> service working around the clock, around the globe, visit
> http://www.messagelabs.com
> ________________________________________________________________________
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/