Re: Re:[microblaze-uclinux] StarterKit+uClinux beginer

["Pavel Ivanchenko" <pi-home@xxxxxxx>]

Hi Jeff,
I make itself simply one layer PCB to A1 connector and 5 wire via A2 
connector.

----- Original Message ----- 
From: <support@xylotex.com>
To: <microblaze-uclinux@itee.uq.edu.au>
Sent: Sunday, September 25, 2005 9:36 AM
Subject: Re:[microblaze-uclinux] StarterKit+uClinux beginer


> Hi Pavel ,
>
>  I also have a Spartan-3 Starter kit, and am interested in where
> you got the external SDRAM (16Mx16) add-on board from.  Did you make
> it yourself or buy it?
>
> Thanks,
>
> Jeff
>
>> -----Original Message-----
>> From: owner-microblaze-uclinux@itee.uq.edu.au [mailto:owner-
> microblaze-
>> uclinux@itee.uq.edu.au] On Behalf Of Pavel Ivanchenko
>> Sent: Friday, August 19, 2005 7:51 AM
>> To: microblaze-uclinux@itee.uq.edu.au
>> Subject: [microblaze-uclinux] StarterKit+uClinux beginer
>>
>> Hi, sorry for my poor English.
>>
>> I have Xilinx StarterKit (Spartan3-200 rev E) and I want run
> uClinux on
>> this
>> board.
>> First step I connect external SDRAM (16Mx16) from onboard
> connectors (work
>> correctly, I tested).
>> Next I download uClinux distributives from www.uclinux.org and
> packages
>> from
>> http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux/.
>> Next I generate "auto-config.in" file and compile uClinux image.
>> Next I download image thought  XMD to SDRAM and run it.
>> But  booting process stopped in "Calibrate delay loop :" :(
>>
>
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@itee.uq.edu.au
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive : 
> http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
> 

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/