Re: Re:[microblaze-uclinux] StarterKit+uClinux beginer

["Pavel Ivanchenko" <pi-home@xxxxxxx>]

Hi Jeff,
I use OPB SDRAM core existing in EDK.

----- Original Message ----- 
From: <support@xylotex.com>
To: <microblaze-uclinux@itee.uq.edu.au>
Sent: Tuesday, September 27, 2005 1:08 AM
Subject: Re:[microblaze-uclinux] StarterKit+uClinux beginer


>
>
> Hi Pavel,
>  OK, thanks.
>  Did you create your own IP Core, or did you use an existing one for
> the SDRAM memory interface (and if the second, where did you get it)?
>
> Thanks again,
>
> Jeff
>
> On Mon, 26 Sep 2005 23:19:48 +0500, "Pavel Ivanchenko" <pi-
> home@udm.net> wrote :
>
>> Hi Jeff,
>> I make itself simply one layer PCB to A1 connector and 5 wire via
> A2
>> connector.
>>
>> ----- Original Message ----- 
>> From: <support@xylotex.com>
>> To: <microblaze-uclinux@itee.uq.edu.au>
>> Sent: Sunday, September 25, 2005 9:36 AM
>> Subject: Re:[microblaze-uclinux] StarterKit+uClinux beginer
>>
>>
>> > Hi Pavel ,
>> >
>> >  I also have a Spartan-3 Starter kit, and am interested in where
>> > you got the external SDRAM (16Mx16) add-on board from.  Did you
> make
>> > it yourself or buy it?
>> >
>> > Thanks,
>> >
>> > Jeff
>> >
>> >> -----Original Message-----
>> >> From: owner-microblaze-uclinux@itee.uq.edu.au [mailto:owner-
>> > microblaze-
>> >> uclinux@itee.uq.edu.au] On Behalf Of Pavel Ivanchenko
>> >> Sent: Friday, August 19, 2005 7:51 AM
>> >> To: microblaze-uclinux@itee.uq.edu.au
>> >> Subject: [microblaze-uclinux] StarterKit+uClinux beginer
>> >>
>> >> Hi, sorry for my poor English.
>> >>
>> >> I have Xilinx StarterKit (Spartan3-200 rev E) and I want run
>> > uClinux on
>> >> this
>> >> board.
>> >> First step I connect external SDRAM (16Mx16) from onboard
>> > connectors (work
>> >> correctly, I tested).
>> >> Next I download uClinux distributives from www.uclinux.org and
>> > packages
>> >> from
>> >> http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux/.
>> >> Next I generate "auto-config.in" file and compile uClinux image.
>> >> Next I download image thought  XMD to SDRAM and run it.
>> >> But  booting process stopped in "Calibrate delay loop :" :(
>> >>
>> >
>> > ___________________________
>> > microblaze-uclinux mailing list
>> > microblaze-uclinux@itee.uq.edu.au
>> > Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-
> uclinux
>> > Mailing List Archive :
>> > http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
>> >
>>
>> ___________________________
>> microblaze-uclinux mailing list
>> microblaze-uclinux@itee.uq.edu.au
>> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-
> uclinux
>> Mailing List Archive :
> http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
>>
>>
>>
>>
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@itee.uq.edu.au
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive : 
> http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
> 

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@itee.uq.edu.au
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/