RE: [microblaze-uclinux] generating auto-config.in (MSS file)

[begg0016@xxxxxxxxxxxxxxx]

Here is the MSS file. thought it may make debugging easier!


 PARAMETER VERSION = 2.2.0


BEGIN OS
 PARAMETER OS_NAME = uclinux
 PARAMETER OS_VER = 1.00.c
 PARAMETER PROC_INSTANCE = microblaze_0
 PARAMETER stdout = RS232
 PARAMETER stdin = RS232
 PARAMETER main_memory = Generic_SDRAM
 PARAMETER lmb_memory = dlmb_cntlr
 PARAMETER flash_memory_bank = 0
 PARAMETER main_memory_bank = 0
END


BEGIN PROCESSOR
 PARAMETER DRIVER_NAME = cpu
 PARAMETER DRIVER_VER = 1.00.a
 PARAMETER HW_INSTANCE = microblaze_0
 PARAMETER COMPILER = mb-gcc
 PARAMETER ARCHIVER = mb-ar
 PARAMETER CORE_CLOCK_FREQ_HZ = 66666667
END


BEGIN DRIVER
 PARAMETER DRIVER_NAME = opbarb
 PARAMETER DRIVER_VER = 1.02.a
 PARAMETER HW_INSTANCE = mb_opb
END

BEGIN DRIVER
 PARAMETER DRIVER_NAME = uartlite
 PARAMETER DRIVER_VER = 1.00.b
 PARAMETER HW_INSTANCE = debug_module
END

BEGIN DRIVER
 PARAMETER DRIVER_NAME = bram
 PARAMETER DRIVER_VER = 1.00.a
 PARAMETER HW_INSTANCE = dlmb_cntlr
END

BEGIN DRIVER
 PARAMETER DRIVER_NAME = bram
 PARAMETER DRIVER_VER = 1.00.a
 PARAMETER HW_INSTANCE = ilmb_cntlr
END

BEGIN DRIVER
 PARAMETER DRIVER_NAME = uartlite
 PARAMETER DRIVER_VER = 1.00.b
 PARAMETER HW_INSTANCE = RS232
END

BEGIN DRIVER
 PARAMETER DRIVER_NAME = tmrctr
 PARAMETER DRIVER_VER = 1.00.b
 PARAMETER HW_INSTANCE = opb_timer_1
END

BEGIN DRIVER
 PARAMETER DRIVER_NAME = intc
 PARAMETER DRIVER_VER = 1.00.c
 PARAMETER HW_INSTANCE = opb_intc_0
END

BEGIN DRIVER
 PARAMETER DRIVER_NAME = generic
 PARAMETER DRIVER_VER = 1.00.a
 PARAMETER HW_INSTANCE = dcm_0
END

BEGIN DRIVER
 PARAMETER DRIVER_NAME = sdram
 PARAMETER DRIVER_VER = 1.00.a
 PARAMETER HW_INSTANCE = Generic_SDRAM
END




Quoting Sathyanarayanan Thammanur <sathyanarayanan.thammanur@xxxxxxxxxx>:

> The error occurs because you have not chosen any memory for MAIN_MEMORY
> parameter. Hence when the memory addresses are getting generated, an
> error occurs. Specify the instance name for MAIN_MEMORY parameter in MSS
> and you should see this error go away.
> 
> Sathya
> 
> 
> -----Original Message-----
> From: owner-microblaze-uclinux@xxxxxxxxxxxxxx
> [mailto:owner-microblaze-uclinux@xxxxxxxxxxxxxx] On Behalf Of
> begg0016@xxxxxxxxxxxxxxx
> Sent: Monday, October 24, 2005 12:48 AM
> To: microblaze-uclinux@xxxxxxxxxxxxxx
> Subject: [microblaze-uclinux] generating auto-config.in
> 
> hello,
> 
> i have been following the document from Jason Wu, for developing
> uclinux.
> 
> now i have gone to generate libraries and BSP and have had the following
> error:
> 
> #--------------------------------------
> # uClinux BSP generate...
> #--------------------------------------
> No override specified for MAIN_MEMORY
> ERROR:MDT - ERROR FROM TCL:- uclinux () - expected integer but got ""
> while executing
> "format "0x%08x" $mem_start"
> (procedure "do_memory_setup" line 50)
> invoked from within
> "do_memory_setup $config_file $os_handle "MAIN_MEMORY"
> CONFIG_XILINX_ERAM"
> (procedure "::sw_uclinux_v1_00_c::generate" line 22)
> invoked from within
> "::sw_uclinux_v1_00_c::generate 36380144" 
> Copying Library Files ...
> ERROR:MDT - Error while running "generate" for processor microblaze_0...
> make: *** [microblaze_0/lib/libxil.a] Error 2
> Done.
> 
> I have a similar design to Jason's, however i have used a different RAM
> controller and havnt used ROM.
> 
> Thanks
> 
> Lyndon.
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@xxxxxxxxxxxxxx
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive :
> http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
> 
> 
> 
> 
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@xxxxxxxxxxxxxx
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive :
> http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
> 
> 



___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/