[microblaze-uclinux] auto-config.in error

[begg0016@xxxxxxxxxxxxxxx]

hello all, 

 i have been following the document from Jason Wu, for developing
 uclinux.

 now i have gone to generate libraries and BSP and have had the following
 error:

 #--------------------------------------
 # uClinux BSP generate...
 #--------------------------------------
 No override specified for MAIN_MEMORY
 ERROR:MDT - ERROR FROM TCL:- uclinux () - expected integer but got ""
 while executing
 "format "0x%08x" $mem_start"
 (procedure "do_memory_setup" line 50)
 invoked from within
 "do_memory_setup $config_file $os_handle "MAIN_MEMORY"
 CONFIG_XILINX_ERAM"
 (procedure "::sw_uclinux_v1_00_c::generate" line 22)
 invoked from within
 "::sw_uclinux_v1_00_c::generate 36380144"
 Copying Library Files ...
 ERROR:MDT - Error while running "generate" for processor microblaze_0...
 make: *** [microblaze_0/lib/libxil.a] Error 2
 Done.

 I have a similar design to Jason's, however i have used a different RAM
 controller and havnt used ROM. the problem seem to be with uclinux not liking
the ram controller???


Here is the MSS file.


 PARAMETER VERSION = 2.2.0


BEGIN OS
 PARAMETER OS_NAME = uclinux
 PARAMETER OS_VER = 1.00.c
 PARAMETER PROC_INSTANCE = microblaze_0
 PARAMETER stdout = RS232
 PARAMETER stdin = RS232
 PARAMETER main_memory = Generic_SDRAM
 PARAMETER lmb_memory = dlmb_cntlr
 PARAMETER flash_memory_bank = 0
 PARAMETER main_memory_bank = 0
END


BEGIN PROCESSOR
 PARAMETER DRIVER_NAME = cpu
 PARAMETER DRIVER_VER = 1.00.a
 PARAMETER HW_INSTANCE = microblaze_0
 PARAMETER COMPILER = mb-gcc
 PARAMETER ARCHIVER = mb-ar
 PARAMETER CORE_CLOCK_FREQ_HZ = 66666667
END


BEGIN DRIVER
 PARAMETER DRIVER_NAME = opbarb
 PARAMETER DRIVER_VER = 1.02.a
 PARAMETER HW_INSTANCE = mb_opb
END

BEGIN DRIVER
 PARAMETER DRIVER_NAME = uartlite
 PARAMETER DRIVER_VER = 1.00.b
 PARAMETER HW_INSTANCE = debug_module
END

BEGIN DRIVER
 PARAMETER DRIVER_NAME = bram
 PARAMETER DRIVER_VER = 1.00.a
 PARAMETER HW_INSTANCE = dlmb_cntlr
END

BEGIN DRIVER
 PARAMETER DRIVER_NAME = bram
 PARAMETER DRIVER_VER = 1.00.a
 PARAMETER HW_INSTANCE = ilmb_cntlr
END

BEGIN DRIVER
 PARAMETER DRIVER_NAME = uartlite
 PARAMETER DRIVER_VER = 1.00.b
 PARAMETER HW_INSTANCE = RS232
END

BEGIN DRIVER
 PARAMETER DRIVER_NAME = tmrctr
 PARAMETER DRIVER_VER = 1.00.b
 PARAMETER HW_INSTANCE = opb_timer_1
END

BEGIN DRIVER
 PARAMETER DRIVER_NAME = intc
 PARAMETER DRIVER_VER = 1.00.c
 PARAMETER HW_INSTANCE = opb_intc_0
END

BEGIN DRIVER
 PARAMETER DRIVER_NAME = generic
 PARAMETER DRIVER_VER = 1.00.a
 PARAMETER HW_INSTANCE = dcm_0
END

BEGIN DRIVER
 PARAMETER DRIVER_NAME = sdram
 PARAMETER DRIVER_VER = 1.00.a
 PARAMETER HW_INSTANCE = Generic_SDRAM
END

 Thanks

 Lyndon.
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/