Re: [microblaze-uclinux] XMD Issues (one more thing)

["Abot Botbot" <dejanigma@xxxxxxxxxxx>]

Hello,

 Heres the snippet from my mhs regarding the microblaze configuration. I'm 
so mad this doesn't work now. In a few days Kevin Chen will come back and 
maybe he will have more insight if it hasnt been solved by then.

BEGIN microblaze
PARAMETER INSTANCE = microblaze_0
PARAMETER HW_VER = 4.00.a
PARAMETER C_DEBUG_ENABLED = 1
PARAMETER C_NUMBER_OF_PC_BRK = 2
PARAMETER C_NUMBER_OF_RD_ADDR_BRK = 1
PARAMETER C_NUMBER_OF_WR_ADDR_BRK = 1
PARAMETER C_USE_ICACHE = 1
PARAMETER C_CACHE_BYTE_SIZE = 8192
PARAMETER C_USE_DCACHE = 1
PARAMETER C_DCACHE_BYTE_SIZE = 8192
PARAMETER C_ICACHE_USE_FSL = 1
PARAMETER C_DCACHE_USE_FSL = 1
PARAMETER C_ICACHE_BASEADDR = 0x24000000
PARAMETER C_ICACHE_HIGHADDR = 0x27ffffff
PARAMETER C_ADDR_TAG_BITS = 13
PARAMETER C_DCACHE_BASEADDR = 0x24000000
PARAMETER C_DCACHE_HIGHADDR = 0x27ffffff
PARAMETER C_DCACHE_ADDR_TAG = 13
PARAMETER C_USE_FPU = 1
PARAMETER C_FPU_EXCEPTION = 1
PARAMETER C_FSL_LINKS = 1
BUS_INTERFACE DLMB = dlmb
BUS_INTERFACE ILMB = ilmb
BUS_INTERFACE DOPB = mb_opb
BUS_INTERFACE IOPB = mb_opb
BUS_INTERFACE IXCL = ixcl
BUS_INTERFACE DXCL = dxcl
BUS_INTERFACE SFSL0 = fsl_v20_0
PORT CLK = sys_clk_s
PORT DBG_CAPTURE = DBG_CAPTURE_s
PORT DBG_CLK = DBG_CLK_s
PORT DBG_REG_EN = DBG_REG_EN_s
PORT DBG_TDI = DBG_TDI_s
PORT DBG_TDO = DBG_TDO_s
PORT DBG_UPDATE = DBG_UPDATE_s
PORT Interrupt = Interrupt
END

Thanks,
Andy


> From: John Williams <jwilliams@xxxxxxxxxxxxxx>
> Reply-To: microblaze-uclinux@xxxxxxxxxxxxxx
> To: microblaze-uclinux@xxxxxxxxxxxxxx
> Subject: Re: [microblaze-uclinux] XMD Issues (one more thing)
> Date: Fri, 18 Nov 2005 08:37:27 +1000
>
> Andy,
>
> Abot Botbot wrote:
>
> >   I forgot to mention. It says "MDM peripheral not detected in hardware"
> > but in my add/edit cores dialogue I have MDM 2.01a. The MDM also appears
> > in the MHS file as:
> >
> > BEGIN opb_mdm
> [snip]
>
> > END
>
> This all looks pretty reasonable - you must also make sure that the HW
> debug parameters and ports are set corecting in the microblaze - post
> your BEGIN microblaze  ... END fragment here if you like.
>
> Regards,
>
> John
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@xxxxxxxxxxxxxx
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive : 
> http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/

_________________________________________________________________
Don?t just search. Find. Check out the new MSN Search! 
http://search.msn.click-url.com/go/onm00200636ave/direct/01/

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/