Re: [microblaze-uclinux] ml310 development board sram failure

[Paul Hartke <phartke@xxxxxxxxxxxx>]

I've successfully used Base System Builder created designs with the DDR on
ml310.  I presume you are using the latest EDK/ISE Service Packs?

Paul

Quoting elynum@xxxxxxx:
> Hello, does anyone have the ml310 development board from xilinx?  Well,
> I'm having a problem with the ddr sdram.  I had this same problem with
> another development board from avnet.  The memory test for the DDR SDRAM
> fails.  Now avnet offered the solution in their file that dummy signals
> had to be created because the fpga was taking a voltage down.  That
> solved that issue but for this ml310 board I'm having the same problem is
> that the SDRAM is failing the memory test but the dummy signal solution I
> don't think works for this board because it has been laid out
> differently.  Has someone encountered this problem with the ML310 dev
> system.
>
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/