Re: Re: [microblaze-uclinux] ml310 development board sram failure

[Paul Hartke <phartke@xxxxxxxxxxxx>]

I didn't read your original post closely enough:
"Paul, I've tried to update my MHS with the updated UCF, of course I had
to go and add and edit the netlist after getting all of that done I got a
timing constraint error."

You shouldn't have changed anything else except add these two lines to the
UCF file.

Quoting elynum@xxxxxxx:
> Paul,
>
> That didn't work still have the timing constraint error.
> >
> > From: Paul Hartke <phartke@xxxxxxxxxxxx>
> > Date: 2006/01/12 Thu PM 02:35:04 EST
> > To: microblaze-uclinux@xxxxxxxxxxxxxx,  elynum@xxxxxxx
> > CC: microblaze-uclinux@xxxxxxxxxxxxxx
> > Subject: Re: Re: [microblaze-uclinux] ml310 development board sram
> failure
> >
> > Try removing all the other additions except:
> > INST "ddr_dcm/ddr_dcm/DCM_INST"      CLKOUT_PHASE_SHIFT = "FIXED";
> > INST "ddr_dcm/ddr_dcm/DCM_INST"      PHASE_SHIFT = "72";
> >
> > Paul
> >
> > Quoting elynum@xxxxxxx:
> > > Paul, I've tried to update my MHS with the updated UCF, of course I
> had
> > > to go and add and edit the netlist after getting all of that done I
> got a
> > > timing constraint error.
> > >
> > > The error I got is included in the xflow.log file I've included.
> > >
> > > If you don't have a clue on what the error is that I'm getting
> > >
> > > I was wondering if you could send me your BSB and MHS and UCF files
> so I
> > > test the SRAM.
> > >
> > > Thanks,
> > > >
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/