RE: [microblaze-uclinux] mch_ddr on XUP V2P board

["Deli Geng \(David\)" <deli.geng@xxxxxxxxxxxx>]

What's the problem with the current mch_ddr? Anyway to work around the bug
or is it completely un-useable? (if so, why did Xilinx release it?) I found
an application note on the Xilinx website, so I thought it should basically
be working.

David

-----Original Message-----
From: owner-microblaze-uclinux@xxxxxxxxxxxxxx
[mailto:owner-microblaze-uclinux@xxxxxxxxxxxxxx] On Behalf Of Paul Hartke
Sent: 12 January 2006 19:26
To: microblaze-uclinux@xxxxxxxxxxxxxx; Deli Geng (David)
Cc: microblaze-uclinux@xxxxxxxxxxxxxx
Subject: Re: [microblaze-uclinux] mch_ddr on XUP V2P board

See John's post on this topic:
http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/archive/2005/10/msg00
206.html

I haven't seen a patch from Xilinx for the mch_opb_ddr controller issues.

Paul

Quoting "Deli Geng (David)" <deli.geng@xxxxxxxxxxxx>:
>
> Hi, there,
>
> Has anyone successfully configured to use the mch_ddr on Xilinx XUP V2P
> board? I try many times, but the memory test always fails.
>
> Thanks
>
> David
>
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive :
http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/