|
Hi Can you please confirm it is the SDRAM rather than SRAM that is proving
problematic for you? – Your email Subject states the latter! Regards Simon ----------------------------------------------------------------------------------------- Simon George _ Embedded Processor
Specialist ( / /\/ \ \ XILINX - Benchmark House, / / WEYBRIDGE, Surrey
KT13 0RH ( \_\/\ Office :
+44 (0)870 7350 557 Website :
http://www.xilinx.com ----------------------------------------------------------------------------------------- -----Original Message----- I didn't read your original post closely enough: "Paul, I've tried to update my MHS with the updated UCF, of course
I had to go and add and edit the netlist after getting all of that done I got
a timing constraint error." You shouldn't have changed anything else except add these two lines to
the UCF file. Quoting elynum@xxxxxxx: > Paul, > > That didn't work still have the timing constraint error. > > > > From: Paul Hartke <phartke@xxxxxxxxxxxx> > > Date: 2006/01/12 Thu PM 02:35:04 EST > > To: microblaze-uclinux@xxxxxxxxxxxxxx, elynum@xxxxxxx > > CC: microblaze-uclinux@xxxxxxxxxxxxxx > > Subject: Re: Re: [microblaze-uclinux] ml310 development board
sram > failure > > > > Try removing all the other additions except: > > INST
"ddr_dcm/ddr_dcm/DCM_INST"
CLKOUT_PHASE_SHIFT = "FIXED"; > > INST
"ddr_dcm/ddr_dcm/DCM_INST" PHASE_SHIFT
= "72"; > > > > Paul > > > > Quoting elynum@xxxxxxx: > > > Paul, I've tried to update my MHS with the updated UCF,
of course I > had > > > to go and add and edit the netlist after getting all of
that done I > got a > > > timing constraint error. > > > > > > The error I got is included in the xflow.log file I've
included. > > > > > > If you don't have a clue on what the error is that I'm
getting > > > > > > I was wondering if you could send me your BSB and MHS
and UCF files > so I > > > test the SRAM. > > > > > > Thanks, > > > > ___________________________ microblaze-uclinux mailing list microblaze-uclinux@xxxxxxxxxxxxxx Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux Mailing List Archive :
http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/ |