From: Paul Hartke <phartke@xxxxxxxxxxxx>
Reply-To: microblaze-uclinux@xxxxxxxxxxxxxx
To: microblaze-uclinux@xxxxxxxxxxxxxx, leo han <wenwenti@xxxxxxxxxxx>
CC: microblaze-uclinux@xxxxxxxxxxxxxx
Subject: Re: [microblaze-uclinux] plb tft lcd controller
Date: Sat, 18 Feb 2006 08:01:11 -0800
Did you associate the tft_ref driver with the hardware plb_tft_cntrl_ref
pcore? Otherwise EDK won't know to compile the software drivers for the
pcore.
Also, I assume you are using Microblaze. If that is the case, you need the
opb2plb bridge to connect the plb_tft_cntrl_ref to Microblaze. Also,
you'll need an opb2dcr bridge for the control port as well.
Paul
Quoting leo han <wenwenti@xxxxxxxxxxx>:
> I had a problem with the tft controller. I instantiated an instance of
> the
> controller in BSB. It includes the IP in mhs. However, I can not compile
> the
> software I downloaded from xilinx. It seems that the generated
> xparameters.h
> file dose not define the macros for tft.
> Could anybody point me to any information about the tft?
> BTW, I am using EDK7.1 and XUP board.
>
> Thanks.
>
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive :
http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/