[microblaze-uclinux] Building uClinux for Insight/Memec S3MB1500 board

[Mike Thompson <mpthompson@xxxxxxxxx>]

Hello,

I'm new to both uClinux and the Microblaze and I'm hoping I can get some 
basic questions answered regarding building uClinux for the MicroBlaze 
on the Insight/Memec S3MB1500 board.

I have a full CVS checkout of uClinux-dist and uClinux-2.4.x on an 
Ubuntu 5.10 Linux system.  I've also created the symbolic link mapping 
"uClinux-2.4.x" as "uClinux-dist/linux-2.4.x".  My next step is to 
change directory into the "uClinux-dist" directory and run "make 
menuconfig".

Unfortunately, I don't see a "Target Platform Selection" menu item as 
indicated in the documentation on the MicroBlaze uClinux website.  I'm 
not sure if this is because of recent changes to the uClinux source tree 
or not.  I do see a "Vendor/Product/Selection --->" and 
"Kernel/Library/Defaults Selection --->" menu item.  Is this what I 
should see?

In any case I press on and choose "Vendor/Product Selection --->" to 
then select "Insight" as the Vendor and "mbvanilla_net" as the Insight 
Product. Then I exit these menus.  I have a feeling this is where I'm 
going off track.

Next I then choose "Kernel/Library/Defaults Selections" and select 
"uClibc"  and "Default all settings (lose changes)".  I then exit these 
menus.

When I exit where the make system goes through the kernel configuration 
process.

Is the process above at all correct configuring the uClinux kernel for 
the "Insight/Memec S3MB1500" hardware I'm targeting?

I apologize if this question is very basic, but hopefully I'll be able 
to pick this stuff up quickly once I learn the lay of the land a little 
better.

Thanks,

Mike Thompson
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/