RE: [microblaze-uclinux] uclinux boot problem (kernel panic)

[Brettschneider Falk <fbrettschneider@xxxxxxxxxxxxxxxxx>]

Hi,

your root filesystem is at index 0, that means the first MTD partition. But
there's the bootloader. Your last MTD partition contains the "Romfs", so the
log entry should actually be uclinux[mtd]: root filesystem index=0. That may
be reason for the behaviour. This link might help you to find a solution:
http://www.ucdot.org/article.pl?sid=03/01/11/1049210&mode=thread.

-----Original Message-----
From: Sanjay Patel
>
>
>Hi  everybody,
> 
>We programmed the linear flash memory with the tool (Programming Flash
Memory) provided within XPS. It allows programming the flash >with .srec
file.
>The image.srec file generated after following kernel compilation steps
provided was used for programming. 
> 
>The OUTPUT on the hyperterminal was as follows:
>
...8< snip
>
>What could be the problem? Are we wrong anywhere? Are we missing any step
to follow?
>Please guide us!
> 
>The board used by us is ML402 Board! The version is RevB. The size of flash
memory is 8MB on board.
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/