Re: [microblaze-uclinux] Building uClinux for Insight/Memec S3MB1500 board

[Marco Cavallini <arm.linux@xxxxxxxxxxxxxxxx>]

Hi
You can find the answer in mailing list archive too ;-)

> I'm new to both uClinux and the Microblaze and I'm hoping I can get some 
> basic questions answered regarding building uClinux for the MicroBlaze 
> on the Insight/Memec S3MB1500 board.
.snip.
> Unfortunately, I don't see a "Target Platform Selection" menu item as 
> indicated in the documentation on the MicroBlaze uClinux website.  I'm 
> not sure if this is because of recent changes to the uClinux source tree 
> or not.  I do see a "Vendor/Product/Selection --->" and 
> "Kernel/Library/Defaults Selection --->" menu item.  Is this what I 
> should see?

yes

> In any case I press on and choose "Vendor/Product Selection --->" to 
> then select "Insight" as the Vendor and "mbvanilla_net" as the Insight 
> Product. Then I exit these menus.  I have a feeling this is where I'm 
> going off track.

Wrong.
Use this:
select "Vendor/Product Selection --->"
then select "Xilinx" as the Vendor and "uclinux-auto" as the product

> Next I then choose "Kernel/Library/Defaults Selections" and select 
> "uClibc"  and "Default all settings (lose changes)".  I then exit these 
> menus.

ok

> When I exit where the make system goes through the kernel configuration 
> process.
>
> Is the process above at all correct configuring the uClinux kernel for 
> the "Insight/Memec S3MB1500" hardware I'm targeting?
>
> I apologize if this question is very basic, but hopefully I'll be able 
> to pick this stuff up quickly once I learn the lay of the land a little 
> better.

best regards

Marco Cavallini
Koan s.a.s. - Bergamo - ITALIA
Embedded and Real-Time Software Engineering
www.koansoftware.com    |    www.klinux.org
___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/