Re: [microblaze-uclinux] No boot log in hyperterm

["Abot Botbot" <dejanigma@xxxxxxxxxxx>]

Folks,

  I just noticed something strange in the Getting Started Tutorial. On page 
22, "Additional Hardware Platform Settings Without FSL", the picture of the 
add/edit cores dialogue shows "C_WRITE_FSL_PORTS = 1" from the Parameters 
tab. Is this still supposed to be 1 even if there is no FSL link to the 
debug hardware?

Thanks,
Andy


> From: "Abot Botbot" <dejanigma@xxxxxxxxxxx>
> Reply-To: microblaze-uclinux@xxxxxxxxxxxxxx
> To: microblaze-uclinux@xxxxxxxxxxxxxx
> Subject: Re: [microblaze-uclinux] No boot log in hyperterm
> Date: Mon, 20 Mar 2006 17:37:34 +0000
>
> Folks,
>
>    I still haven't been able to get any good output from the UART. I 
> hooked it up to the scope and I didnt see any data flowing past and my 
> trigger never went off, so I think I've got a serious problem with my 
> design. I tried to rebuild the getting started tutorial without the FSL 
> degbug link and I get an error durring place and route. Does anyone happen 
> to have a good MHS and MSS file from this getting started tutorial so I 
> could compare it to mine and hopefully track down my error?
>
> Thanks,
> Andy
>
>
> > From: "Abot Botbot" <dejanigma@xxxxxxxxxxx>
> > Reply-To: microblaze-uclinux@xxxxxxxxxxxxxx
> > To: microblaze-uclinux@xxxxxxxxxxxxxx
> > Subject: Re: [microblaze-uclinux] No boot log in hyperterm
> > Date: Thu, 16 Mar 2006 17:24:15 +0000
> >
> > Paul,
> >
> >   Yea the memory test application output doesn't show up either. Sorry I 
> > forgot to mention that. I think I'm going to reduce the baud and check the 
> > UCF for errors as well as break out the o-scope to make sure the line is 
> > at least toggling.
> >
> > Thanks so much,
> > Andy
> >
> >
> > > From: Paul Hartke <phartke@xxxxxxxxxxxx>
> > > Reply-To: microblaze-uclinux@xxxxxxxxxxxxxx
> > > To: microblaze-uclinux@xxxxxxxxxxxxxx, Abot Botbot 
> > > <dejanigma@xxxxxxxxxxx>
> > > CC: microblaze-uclinux@xxxxxxxxxxxxxx
> > > Subject: Re: [microblaze-uclinux] No boot log in hyperterm
> > > Date: Thu, 16 Mar 2006 09:07:51 -0800
> > >
> > > Have you tried a standalone "Hello World" application to isolate whether 
> > > it
> > > is the kernel or the rest of the setup?  The BSB TestApp_Memory 
> > > application
> > > is quite useful for this.
> > >
> > > Paul
> > >
> > > Quoting Abot Botbot <dejanigma@xxxxxxxxxxx>:
> > > > Folks,
> > > >
> > > >   Sorry again to be such a pain. I changed the UART clk frequency in 
> > > the
> > > > MHS
> > > > file and I still dont see anything in minicom or hyperterminal. I 
> > > haven't
> > > > brought out the O-scope yet, but I will very soon for a meager sanity
> > > > check
> > > > that at least something is coming out of the serial port. If someone 
> > > has
> > > > the
> > > > time, please browse my MHS file and see if anything is starkly 
> > > incorrect.
> > > > Keep in mind this should be exactly like the MHS from Wu's getting
> > > > started
> > > > tutorial.
> > > >
> > > > Thanks,
> > > > Andy
> > > >
> > >
> > > ___________________________
> > > microblaze-uclinux mailing list
> > > microblaze-uclinux@xxxxxxxxxxxxxx
> > > Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> > > Mailing List Archive : 
> > > http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
> >
> > _________________________________________________________________
> > On the road to retirement? Check out MSN Life Events for advice on how to 
> > get there! http://lifeevents.msn.com/category.aspx?cid=Retirement
> >
> > ___________________________
> > microblaze-uclinux mailing list
> > microblaze-uclinux@xxxxxxxxxxxxxx
> > Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> > Mailing List Archive : 
> > http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/
>
> _________________________________________________________________
> Express yourself instantly with MSN Messenger! Download today - it's FREE! 
> http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
>
> ___________________________
> microblaze-uclinux mailing list
> microblaze-uclinux@xxxxxxxxxxxxxx
> Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
> Mailing List Archive : 
> http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/

_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today - it's FREE! 
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/