[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[microblaze-uclinux] MSR instruction

To: uClinux <microblaze-uclinux@xxxxxxxxxxxxxx>
Subject: [microblaze-uclinux] MSR instruction
From: George Smith <gesmith@xxxxxxxxxxxxxxxxxx>
Date: Tue, 21 Mar 2006 09:33:07 -0500
Organization: Linear Acoustic, Inc
Reply-to: microblaze-uclinux@xxxxxxxxxxxxxx
Sender: owner-microblaze-uclinux@xxxxxxxxxxxxxx

hi
 When I enable MSR instruction the system hangs. The last thing reported
was the delay loop calibration. I'm using the gnu 3.4 tools and EDK6.3.
Is there anyone using the MSR instruction enabled?

gesmith

-- 
George Smith
VP Engineering
Linear Acoustic, Inc

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/

Follow-Ups:
- Re: [microblaze-uclinux] MSR instruction
  - From: Claudio Lanconelli

Prev by Date: RE: [microblaze-uclinux] uclinux boot problem (kernel panic)
Next by Date: Re: [microblaze-uclinux] MSR instruction
Previous by thread: [microblaze-uclinux] Building uClinux for Insight/Memec S3MB1500 board
Next by thread: Re: [microblaze-uclinux] MSR instruction
Index(es):
- Date
- Thread