[microblaze-uclinux] No luck

["Abot Botbot" <dejanigma@xxxxxxxxxxx>]

Folks,

  So between other pressing projects I've continued to try and debug why my 
wu-tutorial, ML401 design was not outputting to the console. I tried 
scrutinizing the parameters, rebuilding from scratch, rebuilding the 
hardware on windows and downloading the kernel from linux, etc. I have 
gotten the serial port to heat up with the hardware I built in the windows 
environment. The MHS and MSS files for linux and windows hardware are 
identical, yet the windows compiled bit stream works and outputs the memory 
test outputs, and the linux compiled version does not. The (clean) building 
of the kernel in gcc and the building of the hardware in EDK both go off 
without error in the linux environment. I just cannot think of anything else 
I should check. I suspect some necessary software on my linux machine is to 
blame, but I am using the same distro as John Williams, Cent OS 3.6, fully 
yum updated, EDK and ISE 7.1 fully patched with updates and IP. If anyone 
has anything else I should verify in this environment, please let me know.

Thanks,
Andy

_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today - it's FREE! 
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/

___________________________
microblaze-uclinux mailing list
microblaze-uclinux@xxxxxxxxxxxxxx
Project Home Page : http://www.itee.uq.edu.au/~jwilliams/mblaze-uclinux
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/